KidWind Solar Thermal Exploration Kit, modeled after a domestic solar water-heating system. Explore variables such as box color, light intensity, tube design, rate of water pumping, and amount of time it takes to heat the water
KidWind Nacelle, includes the KidWind Nacelle and the Motor Mount Pack, 2 Nacelle body halves, Motor Mount Pack, Recommended for College and High School
Encoder Fan Cart, large fan on a light-weight cart, For use with Vernier Motion Encoder System, offers students the ability to perform kinematics and dynamics experiments with constant acceleration, variable mass, variable thrust, and variable thrust angle
Inductor, made from 20 gauge copper wire. It has an inductance of 5 mH and low resistance. A metal core can be added to increase inductance, The ends of the coil wire are exposed so that you can easily make connections to the Circuit Board or to
Analog Breadboard Cable, provides an easy way for students to build their own sensor circuitry and input signal into a interface for data acquisition, six pins available: SIG1, 5V, ID, VRES, GND, and SIG2, with standard British Telecom Analog (BTA) connector
KidWind simpleGEN, easy-to-build AC generator that allows students to explore the basics of electrical generator design, Recommended for College, High School, and Middle School Science, classroom pack
Melt Station, Weight: 1.0 kg, Capillary tubes: 1.4-1.8 mm outside diameter, 100 mm length, Capillary tube slots: 3, Viewing Lens: 27 mm diameter, Resolution: 0.10 C, Lighting of capillary slots: 3 white LEDs, Accuracy: +/- 0.31 + 0.0006T, where T is temperature in Celsius
Spirometer, designed to make human respiratory measurements at rest and during moderate activity. Used to perform a variety of experiments related to air flow and lung volume. Removable flow head (22 mm ID/30 mm OD) makes it easy to clean and sterilize
Heart Rate Receiver, collect heart rate data from either the Hand-Grip Transmitter or the Chest Belt Transmitter, For use with Go Wireless Heart Rate, Go Wireless Exercise Heart Rat
Ethanol sensor, used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample
VSMT Tackle Kit, For use with Vernier Structures & Materials Tester, includes a 50 x 50 x 6 mm and a 50 x 80 x 6 mm aluminum load plate, chain, threaded rods, U-bolts, and other accessories, connecting threaded parts are 1/4inch diameter material and 20 threads per inch
KidWind Basic Turbine Building Parts, kit includes the KidWind Hub, a wind turbine generator, and 25 dowels, Recommended for College and High School, Pk10
KidWind High Torque Generator with Wires, High Torque Generator produces lower voltage but higher current for a given rotor speed, Recommended for College and High School
Standard USB Adapter, allows to be connected to computer for data collection using Logger Pro or Logger Lite software, Connector 1: USB Mini Type A Receptacle, Connector 2: USB Standard Type A Plug, can also be used with the USB cable that comes with the CBR 2
KidWind simpleGEN, easy-to-build AC generator that allows students to explore the basics of electrical generator design, Recommended for College, High School, and Middle School Science
Friction Pad DTS to your Vernier, Standard Cart, Plunger Cart, or Motion Encoder Cart, and watch the carts move under very consistent friction force. Setting the friction amount is as simple as turning a knob
KidWind GENPack, allows students to construct their own electrical generator and perform experiments with electricity and magnetism, for physics and electrical students exploring Faraday s law, induction, AC/DC electricity production, and energy transformations
High Torque Generator with Wires, produces lower voltage but higher current for a given rotor speed, has 4-foot leads with shrink-wrap reinforced soldering, with 2 mm driveshaft as the standard Wind Turbine Generator, for load devices with higher current draw, such as water pump
Interface Shield provides a convenient way to make connections from microcontrollers to sensors. Shield plugs directly on top of and adds two BTA (analog) and two BTD (digital) sockets, be used with SparkFun RedBoard, also works with Intel Galileo
Adapter, myDAQ, allows to connect sensors to National Instruments interface, Includes: two connectors for analog sensors and one connector for digital sensors, screw terminal and header pins provide access to myDAQ lines not used by connectors
Spectrophotometer Optical Fiber, designed exclusively for emission spectrum experiments, Simply insert the unit into the cuvette holder, and point the tip of the 1 m optical fiber at a light source, wavelength range: 350 nm to 900 nm
Digital Extension Cable, 1.5 m long, can be used with any sensor that connects to a digital channel. Port will be labeled DIG1 or DIG2. Each cable is 2 meters in length
Analog Extension Cable, 1.5 m long, can be used with any sensor that connects to an analog channel labeled CH1, CH2, CH3, or CH4. Each cable is 2 meters in length
Book, Renewable Energy with Vernier, Recommended for High School, features 26 experiments in wind and solar energy, contains a combination of explorations, traditional experiments, inquiry investigations, engineering projects
Time of Flight Pad sensor to precisely measure how long a projectile has been in motion, determine the launch speed of a projectile, along with the time the projectile is in flight, allow students to see just how kinematic calculations work in rea
LabQuest Viewer* Computer Software, displays and controls screen of a LabQuest using a computer, can be used to demonstrate functions of LabQuest and to enhance group presentations and to monitor student use of LabQuest devices in lab and to view and control remotely
KidWind Motor Mount Pack, secures a motor to the nacelle, Includes: Two blue plastic motor mounts, Mounting screws and nuts, Recommended for College and High School
Variable Load, used in conjunction with the Energy Sensor to provide a range of resistive loads for projects such as wind turbines or solar panels, Students can adjust the potentiometer to provide resistances between 6 and 255 ohm
Circuit Board 2, Mass: 0.44 kg, Optional power sources: up to 4 AA batteries, not included, DC power supply such as Extech Digital DC power supply, Power Amplifier, Maximum voltage: 10 V, Resettable fuse opens at 0.8 A, but 0.3 A or less is recommended
Digital Control Unit, combined with features in Logger Pro, makes control of electrical devices, such as buzzers, lights, motors, pumps, and relays, both straightforward and flexible. The DCU is a great way to introduce hands-on STEM
KidWind Wind Turbine Generator with Wire,Voltage output: 0-10 V, Amperage output: 0-0.3 A, Diameter: 1.25 in, Wire length: 4 ft, Shaft diameter: 2 mm, Recommended for College, High School, and Middle School Science
Combination 2. 2 m Track and Optics Bench, black anodized aluminum and includes a metric scale. Extremely rigid, this 2. 2 meter track will not sag under use, The track includes 2 Adjustable Two Foot Levelers.
EasyTemp temperature sensor, mini-A USB connector that allows you to attach the temperature probe directly to the USB port of a TI-84 Plus graphing calculator or TI-Nspire handheld, Connecting the sensor to the calculator will automatically launch
Motion Encoder Cart and Receiver, to add Motion Encoder capability. It includes: fully assembled Motion Encoder Cart, as well as the Motion Encoder Receiver and a Motion Encoder Long Track Strip
Go Wireless* Exercise Heart Rate, Recommended for College, High School, and Middle School Science, excellent hands-free option for continuously monitoring heart rate before, during, and after exercise or while a person is stationary
ProScope Stand, steadily holds ProScope in a wide variety of positions. Perfect for mounting ProScope dissection subject or to capture classroom images
Independence of Motion, enables the Projectile Launcher to perform the classic experiment where one ball is dropped as another is projected horizontally. The balls strike the floor simultaneously. A built-in level makes leveling th
Emissions Spectrometer optical fiber, Instantly collect emissions spectra from light bulbs, gas discharge tubes, or the sun, It connects directly to your computer gives precise measurements over a range of 350-900 nm, without an optical fibe