Air+Quality+and+Atmosphere+Activities+and+Models

Description:   These modified epoxy resin worktops are available with or without a 5.1cm (2") diameter vent hole

Description:   Ideal for rooms with shallow countertops or ceilings below 8', these hoods are constructed of sturdy, epoxy-coated steel both inside and out.<BR><BR>Furnished with a 3/16" tempered safety glass counterbalanced sash and duct collar, the hoods ensure your students’ safety. A removable front panel and air foil, vapor-proof interior light, and two-piece adjustable baffle make for easy access and convenient use.<BR><BR>The right side fixture is factory prepared to accept up to three service fixtures, one duplex electrical receptacle, and air monitor. The side wall is factory prepared for a wall-mounted cupsink with turret. Hoods are available in two model types – Basic 47 Hoods with a 4' nominal width are designed as an individual lab station, <BR><BR>Basic 70 Hoods are 6' in width and spacious enough to accomodate numerous samples or workstations.<BR><BR>Both models are available with or without a blower. Blowers may be mounted in or above the hood, or on the roof. Basic 47 hoods that include a blower have a 3/4 hp motor. <BR><BR>Note: Worksurface, base cabinet, and blower are required for operation, and sold separately.<BR><BR>For assistance, contact your local sales representative

Description:   This self-contained hood unit comes equipped with an integral exhaust blower and carbon filter, which do not require duct or venting to the outside. Small quantities of solvents, acids, and odors are quickly absorbed in an activated carbon filter which recirculates air back into the room, thus avoiding installation and energy cost. Hood is ideal for laboratories that require multiple locations or where space is limited. Equipped with 115V exhaust blower, vapor proof light switch, and power cord, unit is fully assembled. Filters, worksurface, and base stands are available separately.

Description:   Designed for classroom use, these lightweight hoods feature an epoxy-coated aluminum frame with tempered safety glass front sash, sides, rear baffle, and top.

Description:   Self-contained ductless enclosures allow safe handling of organic, formaldehyde, acid gas, sulfur compounds, or ammonia chemical fumes and vapors.

Description:   Provides Professional Safety Standards for Lab Applications

Description:   Erlab’s HALO Carbon is a ceiling mounted laboratory grade air filtration system working to purify the air from fugitive emissions present in the laboratory, while also providing real-time communication with the laboratory manager and users, of the air pollution levels and 24/7 data.

Description:   Erlab’s CaptairBio PCR Workstations are designed to protect sensitive biological applications against both environmental pollution and cross-contamination. The HEPA filter will bring clean air down to the work surface, with high efficiency UV lights to decontaminate the worktop from biological cross-contamination.

Description:   Erlab’s CaptairFlow Clean Air Enclosures are designed to prevent cross-contamination for applications such as non-pathogenic cell cultures, in-vitro cultures, microbiology, homeopathic preparations, electronics, and optics where product protection is required. They feature a high efficiency filtration system that provides a particle-free workstation around the manipulation, bringing HEPA filtered clean air down to the work surface.

Description:   The SureAir™ is designed to keep your workspace clean, easy-to-use and organized.

Description:   The Basic™ hood is ideal for rooms with ceilings below 2.4 m, 8" and for shallow countertops.

Description:   For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC Perchloric Acid, Protector Stainless Steel Perchloric Acid, Logic+, Logic, Cell Logic, PuriCare Procedure Stations and Protector Radioisotope laboratory hoods

Description:   Erlab’s Captair Ductless Filtering Fume Hoods and Powder Weighing Stations are 100% ductless, meaning no HVAC connection to the outside is required. Some models can be placed on mobile bases to be wheeled around, or shared between laboratories. The units offer end users protection from particulate, and or liquid handlings. Units are also cleanroom compliant with HEPA at the exhaust. Customers can weigh down to six decimal places without interruption of the scale.

Description:   The durable, stainless steel-lined Protector® Evidence Drying Cabinet provides a secure ventilated area to dry evidence such as clothing and bedding