"Fume Hoods and Shields"

These ADA-compliant base stands support up to 453.6kg (1000lbs.).

Personnel are protected by a clear polycarbonate barrier with exceptional impact resistance and optical clarity.

This shield is a must where chemical splashes can occur.

Ideal for rooms with shallow countertops or ceilings below 8', these hoods are constructed of sturdy, epoxy-coated steel both inside and out.

Furnished with a 3/16" tempered safety glass counterbalanced sash and duct collar, the hoods ensure your students’ safety. A removable front panel and air foil, vapor-proof interior light, and two-piece adjustable baffle make for easy access and convenient use.

The right side fixture is factory prepared to accept up to three service fixtures, one duplex electrical receptacle, and air monitor. The side wall is factory prepared for a wall-mounted cupsink with turret. Hoods are available in two model types – Basic 47 Hoods with a 4' nominal width are designed as an individual lab station,

Basic 70 Hoods are 6' in width and spacious enough to accomodate numerous samples or workstations.

Both models are available with or without a blower. Blowers may be mounted in or above the hood, or on the roof. Basic 47 hoods that include a blower have a 3/4 hp motor.

Note: Worksurface, base cabinet, and blower are required for operation, and sold separately.

For assistance, contact your local sales representative

Erlab’s ChemTrap Chemical Filtration Option For Safety Cabinets V201 is an add on filtration system that will filter the interior space of a flammable, acid, or corrosive cabinet. The filters will capture and retain toxic fumes present within the cabinet, and will return clean air back to the laboratory, eliminating odors when the door is opened. Designed as a standalone system with no need for ducting to the outside, it is equipped with an adjustable pipe that accommodates connection points from the side or back of your existing cabinet via the bung.

Add on filtration system that will filter the interior space of a flammable, acid, or corrosive cabinet.

Polycarbonate safety shield is perfect for counters, desks, reception areas or any other setting where face to face interaction occurs.

This self-contained hood unit comes equipped with an integral exhaust blower and carbon filter, which do not require duct or venting to the outside. Small quantities of solvents, acids, and odors are quickly absorbed in an activated carbon filter which recirculates air back into the room, thus avoiding installation and energy cost. Hood is ideal for laboratories that require multiple locations or where space is limited. Equipped with 115V exhaust blower, vapor proof light switch, and power cord, unit is fully assembled. Filters, worksurface, and base stands are available separately.

Erlab’s CaptairStore Filtering Chemical Storage Cabinets will store your active use bottles within a filtered chemical storage cabinet, operating 24 hours 7 days a week. The filter within will ensure no buildup of chemical vapors or odors within the cabinet. No HVAC connection to the outside will be required. Each cabinet has Smart Technology™ - an exclusive set of tools that consists of Smart-Light Communication™, chemical sensors (*optional), real-time status, and the eGuard app.

Portable exhausters for use with XPert™ balance enclosures and weigh boxes, Precise™ HEPA-filtered glove boxes, and Protector™ XVS ventilation stations, demonstration hoods, and workstations. Exhausters use carbon and/or HEPA filters to remove hazardous powders, particulates, or vapors from the exhaust air stream, returning filtered air to the environment. No ducting to the outside is required.

Erlab’s HALO Carbon is a ceiling mounted laboratory grade air filtration system working to purify the air from fugitive emissions present in the laboratory, while also providing real-time communication with the laboratory manager and users, of the air pollution levels and 24/7 data.

321 Stainless steel work surface

These modified epoxy resin worktops are available with or without a 5.1cm (2") diameter vent hole

The Basic™ hood is ideal for rooms with ceilings below 2.4 m, 8" and for shallow countertops.

For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC Perchloric Acid, Protector Stainless Steel Perchloric Acid, Logic+, Logic, Cell Logic, PuriCare Procedure Stations and Protector Radioisotope laboratory hoods