152mm diameter plate is ideal for supporting beakers, mantles, and petri dishes. Plate fits standard lattice lab frames using Talon connectors 21572-501, 21572-556, or 60097-055, all available separately.
Special connector fastens lab frame rod to steel channels. Connector loosens and slides up or down for easy adjustment of rod position. Maximum rod diameter 13mm.
Low profile connector with sturdy aluminum construction allows rods to be held in cross-connection or perpendicular fashion. Maximum rod diameter 13mm. 25x22mm.
Connectors extend the length of extension clamps and lab frame rods. Corrosion-resistant Connectors come with two set screws. Maximum rod diameter 13mm.
Y-Shaped Flint Glass Connecting Tube, Arm Length: 1 1/2in, with a 120 deg angle provides safer connections as the ends have constrictions to hold rubber tubing securely, Made from quality flint glass, Size: 1/4in ID X 5/16in OD (7.9mm)
T-Shaped Flint Glass Connecting Tube, Arm Length: 1 1/2in, For joining two rubber tubes to a common tube at right angles. Safer connections are provided as the ends have constrictions to hold rubber tubing securely, Size: 1/4in ID X 5/16in OD (7.9mm)
Adapter, myDAQ, allows to connect sensors to National Instruments interface, Includes: two connectors for analog sensors and one connector for digital sensors, screw terminal and header pins provide access to myDAQ lines not used by connectors
Lattice Lab Rod Connector, material: aluminum, is used to attach two aluminum rods together, 12.9mm inner diameter, Includes two set screws and an Allen key
Simulator Direct Audio Cables Double, cable connects the E-Scope to an Audio Shoe. The audio shoe is a plastic fitting that snaps on to the hearing aid and is available from the hearing aid manufacturer or an audiologist
Simulator Direct Audio Cables Single, connects the E-Scope to an Audio Shoe. The audio shoe is a plastic fitting that snaps on to the hearing aid and is available from the hearing aid manufacturer or an audiologist
Durable, lightweight handle reduces strain and transfers maximum energy with minimum exertion. Will not absorb bacteria, liquids, or odors. Impervious to water, grease, gasoline, detergents, sanitizers, and solvents. Length range: 86.4-157.5cm.
Laser Diode For Debye-Sears Effect, Wavelength: Approx. 650 Nm, Supply Voltage: 3 V Dc, Power: < 1 Mw, Current Consumption: Max. 30 Ma, With 1 M Connector Lead And Barrel Connector For Connecting ultrasonic Cw Generator, Dimensions: 90 mm X 17 mm Diameter.
Laser Diode For Debye-Sears Effect, Color: Green, Wavelength: Approx. 532 Nm, Power: < 5 Mw, Supply Voltage: 3 V Dc, Current Consumption: Max. 250 Ma, Dimensions: 90 mm X 17 mm Dia, With 1 M Connector Lead For Connecting ultrasonic Cw Generator.
Type J Subminiature Connector Adapter, accepts stranded or solid wire up to 20 AWG with an internal silicone grommet for strain relief and captive cover screws, is color-coded black for J thermocouples according to the ANSI standard
Marina T Connector allows to split air coming from the air pump into two even and constant air streams to separate air-driven devises in aquarium. The plastic and non-corrosive connector is safe for use in salt water aq
Type K Subminiature Connector Adapter, accepts stranded or solid wire up to 20 AWG with an internal silicone grommet for strain relief and captive cover screws, This connector is color-coded yellow for K thermocouples according to the ANSI standard
Type T Subminiature Connector Adapter, accepts stranded or solid wire up to 20 AWG with an internal silicone grommet for strain relief and captive cover screws, This connector is color-coded blue for T thermocouples according to the ANSI standard