Ct Scanner, Linear Movement: Max. 400 mm, Local Resolution: <10 um maximum, Speed Of Movement: 18 Cm/Min, Turning Angle: 0-360 deg, Angular Resolution: 0.225 deg, Maximum Angular Velocity: 1 Rpm, Dimensions: 210X353X520 mm3, For The Purpose Of Generating Tomographic Images.
ultrasonic Continuous Wave Generator With Probe, Power Consumption: 5-60 Va; Failure at 100 Va, Mains Voltage: 90-230 V, 50/60 Hz, Fuse: T630 Ma at 115 V; T315 Ma at 230 V, Generator Frequency: </=20 Mhz, Frequency Increment: 1 Hz
Test Vessel, Testing Volume: Approx. 1 Litre, Laser Fixture: 18 mm Dia, Lens: Plano-Convex, F=100 mm, 16 mm Dia, Made Of Transparent Acrylic, With A Lid And A Transducer Mounting For Conducting The Projecting ultrasonic Waves With Divergent Light.
Ripple Tank, Overhead, Dimensions: 15.5inx12inx4in, 6V DC power source and an overhead projector are required, demonstrates the generation, propagation, reflection, interference and diffraction of waves
Sonometer Wire, 1.3lbs, 9.8x6.7x6.3inch, Set of six wires, brass and steel, length 1.5 m, Set of six wires, brass and steel, length 1.5 m of 22, 24, 26 SWG. Ends looped ready for use.
Sweep Function Generator, 0.1 Hz to 10 MHz, Sine, Square, Triangle, Pulse, & Ramp output, Coarse and Fine tuning, 5 digit LED display, Linear and log sweep, Variable duty cycle, Variable DC offset, cUL certified
Ct Measuring Trough, Material: Acrylic, Thickness Of Sides: 4 mm Approx, Dimensions: 430X150X150 mm3, Made Of Thin Transparent Plastic, Includes Several Special Fittings For Attaching And Connecting ultrasonic Sensors To The Sides Of The Trough.
ultrasonic Probe, Dimensions: 65 mm X 27 mm Dia, For Use With ultrasonic Echoscope, Includes A 16-mm Piezo-Ceramic Disc In A Die-Cast Metal Case And A 1-M Long Cable With A Frequency-Coded Snap-In Plug, Equipment Is Adapted To Sound In Water/Acrylic, 2 Mhz.
Ct Controller, Output: 2 X Stepper Motor Controllers, Bipolar, 5 V, Max. 2 A, Supply Voltage: 100-240 V, 50/60 Hz, Power Consumption: Max. 50 Va, Dimensions: 155X170X315 mm3, For Operating The Two Stepper Motors For The Linear Motion Axis And The Rotation Axis Of The Ct Scanner.