27590 Results for: "industrial+fiber+optics"

Supplier: LGC Standards

Freezing Point, Jet Aviation Fuel (Nominal: -53.7°C)

Supplier: LGC Standards

Regular Unleaded Gasoline 10000 µg/mL in Methanol, with Certified Content of BTEX

Supplier: LGC Standards

Cleveland Open Cup (Nominal: 164°C), Flash Point

Supplier: LGC Standards

10% (w/w) Devolatilized Gasoline in 75 cSt Hydrocarbon Oil

Supplier: LGC Standards

6% w/w devolatilized diesel fuel in 75 cSt oil. Certified gravimetrically.

Supplier: Restek

This contains n-nonatriacontane (C39).

Supplier: LGC Standards

Base Number (BN) Standard: 15 mg KOH/g in Hydrocarbon Oil

Supplier: LGC Standards

Base Number (BN) Standard: 70 mg KOH/g in Hydrocarbon Oil

Supplier: LGC Standards

15% Biodiesel/85% High Cetane Diesel Fuel, v/v

Supplier: Restek

Unweathered Petrochemical Standards

Supplier: SPEX CERTIPREP LLC

Sulfur Oil Standards for Diesel Fuel Analysis in Base Oil

Supplier: LGC Standards

EN 14039/ISO 16703 Mineral Oil Mixture 234 4000 µg/mL in Heptane

Supplier: LGC Standards

500 µg/g Ethylene Glycol Standard in Multi-grade Diesel Engine Oil

Supplier: Restek

Standard Certified Aromatics in Gasoline, (16 components), VOA MIX, Concentration in Solvent: 5, 500 ppm gasoline in P and T methanol, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Supplier: SPEX CERTIPREP LLC

Sulfur Oil Standards for Diesel Fuel Analysis in #2 Diesel Fuel

Supplier: LGC Standards

Mercaptan Sulfur Set for UOP 163 and ASTM D3227: S @ 30 µg/g in 80% Isooctane/20% Toluene

Supplier: Restek

Standards are packaged in acetone at a concentration of 2000 µg/mL in a 1 mL ampoule.

Supplier: GSC International

Double convex lens for optics experiments.

Supplier: Restek

Standard is packaged in methylene chloride at a concentration of 5000 µg/mL in a 1 mL ampoule.

Supplier: Restek

Standard is packaged in methylene chloride at a concentration of 5000 µg/mL in a 1 mL ampoule.

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.

Supplier: Restek

Natural gas standards with 10 components are available in three mixes, from lean to rich.

Supplier: Restek

Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, Restek offer a product that contains these compounds for retention time determination.

Supplier: Restek

The solvents consists of (C6) n-hexane (290 μg/ml), chloroform (60 μg/ml), 1,2-dimethoxyethane (100 μg/ml), 2-hexanone (50 μg/ml), nitromethane (50 μg/ml), pyridine (200 μg/ml), tetralin (100 μg/ml), trichloroethene (80 μg/ml).

Supplier: LGC Standards

Smoke Point Fuel Blend Kit, (Blends 1 – 7: 14.7 mm, 20.2 mm, 22.7 mm, 25.8 mm, 30.2 mm, 35.4 mm and 42.8 mm), LGC Industrial

Supplier: Cytiva

These glass microfibre filters made from borosilicate glass are used for filtration of coarse particles. They offer faster filtration and a higher air flow rate compared to the similar grade GF 9 filters.

Supplier: United Scientific Supplies

Frosted acrylic lenses for optical experiments.

Supplier: I.W. TREMONT CO., INC.

LabExact® Pre-washed and dried IW Tremont Grade TSS filters for Total Suspended Solids (TSS) are processed using reagent grade water (RGW) to wash away extraneous fiber per the requirements of the EPA Standard 2540 C, D and E saving time while maintaining your high levels of quality assurance.

Supplier: RPI

Cesium chloride, Optical Grade

Supplier: United Scientific Supplies

Variety of lenses for optical experiments.