27566 Results for: "industrial+fiber+optics"

Supplier: Ricca Chemical

Two components standard in in methanol.

Supplier: LGC Standards

Metal Additives Standard, MA4: Ca @ 5000; Mg, P, Zn @ 1600 µg/g in Hydrocarbon Oil

Supplier: LGC Standards

Sulfur Set for ASTM D5453: S @ 0, 100, 250, 500, 750, 1000 ng/µL in Isooctane

Supplier: LGC Standards

Metal Additives Standard, MA5: Ba, Ca, Mg, P, Zn @ 3000 µg/g in Hydrocarbon Oil

Supplier: LGC Standards

Metal Additives Standard, MA6: B, Ba, Ca, Mg, P, Zn @ 900 µg/g in Hydrocarbon Oil

Supplier: LGC Standards

1000 µg/g Ethylene Glycol Standard in Multi-grade Diesel Engine Oil

Supplier: Restek

The mix consists of diesel fuel #2 composite, mineral oil.

Supplier: Restek

Contains three components, those are benzene, 2-butanol (sec-butyl alcohol) and toluene.

Supplier: Restek

The glycol standard consists of two components they are ethylene glycol and propylene glycol.

Supplier: Restek

For monitoring samples suspected of gasoline contamination requires laboratories to calibrate and report these compounds.

Supplier: Restek

Standards are packaged in methylene chloride at a concentration of 2000 µg/mL in a 1 mL ampoule.

Supplier: Restek

Standards are packaged in purge-and-trap-grade methanol at the stated concentrations in a 1 mL ampoule.

Supplier: Restek

Standard is packaged in purge-and-trap-grade methanol at a concentration of 2500 µg/mL in a 1 mL ampoule.

Supplier: Restek

Leaking Underground Storage Tank (LUST) standards are packaged in methylene chloride at a concentration of 25 µg/mL in a 1 mL ampoule.

Supplier: LGC Standards

Spectrometric Oil Reference Standard D19-10: Ag, Al, B, Ba, Cd, Cr, Cu, Fe, Mg, Mn, Mo, Na, Ni, Pb, Si, Sn, Ti, V, Zn @ 10 µg/g in Aviation Reference Oil

Supplier: LGC Standards

Spectrometric Oil Reference Standard D19-100: Ag, Al, B, Ba, Cd, Cr, Cu, Fe, Mg, Mn, Mo, Na, Ni, Pb, Si, Sn, Ti, V, Zn @ 100 µg/g in Aviation Reference Oil

Supplier: Cannon

Flash point reference materials are produced in accordance with ASTM D56, Tag closed cup flash point, ASTM D92, Cleveland open cup flash point and ASTM D93, Pensky Marten closed cup flash point

Supplier: Restek

Components in this mix (0.5 μl/ml or 0.05% volume/volume each) are at 10X the concentration of the final test solution specified in ASTM 1618 and ASTM 1387.

Supplier: Restek

This consists of n-decane (C10), n-dodecane (C12), n-tetradecane (C14), n-hexadecane (C16), n-octadecane (C18), n-eicosane (C20) ,n-docosane (C22) , n-tetracosane (C24), n-hexacosane (C26), n-octacosane (C28), n-triacontane (C30) and n-dotriacontane (C32).

Supplier: Ahlstrom

Grade 193 is a binder-free microfiber glass filter made with acid-treated borosilicated glass microfibers with inherently low levels of barium and zind.

Supplier: Cytiva

These borosilicate glass filters are particularly useful for liquid clarification and liquid scintillation counting.

Supplier: Restek

Contains: Benzene (71-43-2); 1,2-Dibromoethane (EDB) (106-93-4); 1,2-Dichloroethane (107-06-2); Ethylbenzene (100-41-4); Isopropyl benzene (cumene) (98-82-8); Methyl tert-butyl ether (MTBE) (1634-04-4); Naphthalene (91-20-3); Toluene (108-88-3); m-Xylene (108-38-3); o-Xylene (95-47-6); p-Xylene (106-42-3)

Supplier: Ahlstrom

Grade 121 is a very thick binder-free microfiber glass filter paper that offers finer particle retention than Ahlstrom 111 with higher wet strength and loading capacity.

Supplier: I.W. TREMONT CO., INC.

LabExact® 934-AH® glass microfiber filters are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. This material is the standard for suspended solids content and related measurements (Standard Methods 2540D and EPA Method 160.2).

Supplier: I.W. TREMONT CO., INC.

LabExact® Grade TSS is a binderless high efficiency (HEPA type) filter mediµm with particle retention of 1.50µm. Liquid filtration properties have been specifically designed for EPA Methods 2540C and 2540D for testing dissolved and suspended solids in water and wastewater.

Supplier: I.W. TREMONT CO., INC.

LabExact® Grade F Fine porosity, medium flow rate, with a 0.7 µm size particle retention. Frequently used with Grade D to filter diluted aqueous solutions containing strong oxidizing, acidic, or alkaline components prior to laser spectroscopy. May also be used for TCLP analysis and collecting extremely fine precipitated proteins, including immunoglobulins.

Supplier: LGC Standards

Paragon Scientific Cloud Point Standard, Biodiesel

Supplier: TCI America

Reference Materials of Sulfur in Gas Oil Certified by The Japan Petroleum Institute, TCI America

Supplier: LGC Standards

Isopar G

Supplier: LGC Standards

Paragon Scientific Bromine Index - 100 mg/100 g