"Vernier Software & Technology"

Inclusive package for inclusive study.

Low output current makes this safe For classroom use.

Eliminates the Need for a Separate Power Supply

KidWind blade pitch protractor, incredibly helpful for measuring the blade pitch angle on your KidWind turbine.

These dowels are used for designing and testing wind turbine blades and fit into the Wind Turbine Hub.

The KidWind Motor Mount Pack holds the motor (generator) in place when affixed to the wind turbine nacelle. The Motor Mount Pack can be used to replace lost parts from a nacelle. It can also be used to mount a nacelle to the tower for a vertical axis wind turbine configuration.

Build a complete turbine by making your own tower and base with PVC pipe (from a hardware store) or use the KidWind Tower and Base Set. You will also need a generator and a way to affix the turbine blades. We recommend using the KidWind Wind Turbine Generator with Wires and a KidWind Hub.

The simpleGEN is an easy-to-build AC generator that allows students to explore the basics of electrical generator design. With the simpleGEN, you can demonstrate Faraday’s law, light LEDs, and perform experiments that explore how coils, magnets, and rotation affect electrical generation. With some quick modifications, you will be able to convert your generator to a simple motor and explore additional variables. You can also take your experiments to the next level by converting your simpleGEN into a wind turbine nacelle.

The simpleGEN is an easy-to-build AC generator that allows students to explore the basics of electrical generator design.

Need a tower for your turbine nacelle? This is the same tower that comes in the Basic Wind Experiment Kit and the Advanced Wind Experiment Kit. The wooden tower has a diameter that fits inside 1-inch PVC fittings.

The hub will press fit onto the shaft of many small DC generators; just attach your own blades and begin experimenting with wind power! The hub is designed to allow you to change blade angles and/or interchange blade sets quickly and easily. An improved stainless-steel insert can take a beating in your classroom year after year without failing!

The Breadboard Cable (Analog) provides an easy way for students to build their own sensor circuitry and input the signal into a Vernier interface for data acquisition.

The Vernier Arduino Interface Shield plugs directly on top of the Arduino and adds two BTA (analog) and two BTD (digital) sockets. This shield was developed to be used with the SparkFun Arduino RedBoard but will work with the Arduino Uno and other Uno equivalents like the Leonardo. It also works with the Intel Galileo.

The Vernier Circuit Board 2 is a basic electricity lab on a board. The turret terminals for every component make it easy to connect basic series and parallel circuits, examine the behavior of different components, and investigate RLC circuits. The Vernier Circuit Board 2 includes 10 bulbs, a resettable fuse, three powering options, 10 alligator clip leads, terminal clips to add components, and pre-installed components.