730 Results for: "Single-use Temperature Sensor"

Supplier: Cryopak Verification Technologies

The iMiniPlus® Dry Ice logger can be programmed to measure extreme temperatures within the range of -100°C to 40°C (-148°F to 104°F)

Supplier: Antyila Scientific

All-in-one PH/ATC Probe, Sealed/SJ, Single junction, Material: Epoxy, Audio plug, 3.5 mm ATC Connector, BNC Connector, Temperature Compensation, for Series

Supplier: YSI

TruLine pH 25, pH electrode, Single Junction, Combination, Gel electrolyte, Epoxy shaft, 1 m cable, BNC Connector.

Supplier: Mettler Toledo

Electrodes with extra long shaft and integrated temperature probe can be used with a wide range of sample types

Supplier: YSI

TruLine pH 26, pH electrode, Single Junction, 3 in 1, Gel electrolyte, Epoxy shaft, 1 m cable, BNC connector, 1 banana plug, NTC 30 kOhm.

Supplier: YSI

Single-junction pH electrode (gray replacement) replacement pH sensor

Supplier: Thermo Fisher Scientific

Automatically correct pH measurements for variation in electrode slope due to temperature change using Orion™ Stainless-Steel Automatic Temperature Compensation (ATC) Probes.

Supplier: YSI

The IDS sensors automatically store their unique serial number and calibration data

Supplier: Mettler Toledo

Electrode uses FRISOCOLYT-B™ electrolyte for low temperature samples

Supplier: Thermo Fisher Scientific

Heracell i CO₂ incubators with variable control of oxygen stimulate cell behaviors that are more predictive of the in vivo environment. Available in a choice of two ranges of O₂ control, 1 to 21% for physiological levels and 5 to 90% for hyperoxic studies.each is supplied with maintenance free zirconia oxide sensor is calibrated automatically and remains in place during the ContraCon high temperature decontamination, and a unique gas tight segmented inner door assembly enables access sections of the chamber without disturbing the entire environment to minimize recovery time, contamination risk, and gas consumption.

Supplier: YSI

The IDS sensors automatically store their unique serial number and calibration data.

Supplier: Ace Glass

Type J, 24 gauge iron constantan thermocouple wire, PTFE insulated with bare junction bead

Supplier: ONSET COMPUTER CORPORATION SE

Measure water pressure, temperature, and water level measurement.

Supplier: ONSET COMPUTER CORPORATION SE

Research grade level measurements and data monitoring for water pressure, temperature, and water level measurements.

Supplier: Antyila Scientific

Faster response and increased stability across a pH range of 0 to 14.

Supplier: Restek

Oven thermometers can be used to verify GC oven temperature.

Supplier: Antyila Scientific

EC200 conductivity cell for Oakton® 200 series meters and meter kits.

Supplier: Yamato Scientific

These digital oil baths are easy to use, they offer digital settingin a compact design oil bath.

Supplier: PHC Corporation

The Cell-IQ™ MCO-50M-PA multigas incubator has been engineered to precisely and accurately control CO₂, O₂, and temperature for optimal culturing conditions.

Supplier: Ace Glass

Glass sheath for use with 89076-414 sensor

Supplier: Yamato Scientific

The compact design and simple set-up systems make these water baths easy to use with rotary evaporators.

Supplier: Antyila Scientific

Convenient heating system includes on/off controller, flexible heating tape, and temperature sensor.

Supplier: Mettler Toledo

Flow cells are recommended for measuring conductivity in pure water or in samples with low conductivity to rule out the falsification of results by carbon dioxide.

Supplier: IKA Works

Extension cable to separate the casing from the sensor. The casing with the electronics may thus be kept away from dangerous vapor released by the medium (for use with ETS-D5 and ETS-D6).

Supplier: WORLD PRECISION INSTRUMENTS LLC

The AirTherm SAT is an auxiliary heater designed to be used in Live Cell Imaging applications with microscopes that are fitted with a full microscope environmental chamber enclosure. It works in conjunction with an ECU (environmental control unit), which uses a PID control algorithm to maintain tightly controlled loops of heat for environment control.

Supplier: AGILENT TECHNOLOGIES, INC (CSD)

Optimize Performance & Maximize Efficiency with supplies for accessories used with 8453/8454 Systems.

Supplier: Yamato Scientific

The compact design and simple set-up systems make these water baths easy to use with rotary evaporators.

Supplier: PHC Corporation

The PHCbi Brand CO₂ incubator design and touchscreen panel deliver exceptional ease of use, effortless cleaning and maintenance as well as outstanding performance with multi-level contamination control.

Supplier: Heidolph NA, LLC

These autoclaves have been designed to provide high quality repeatable performance and accountability for a wide range of applications used in modern laboratories,
which include:

Supplier: Thermo Fisher Scientific

Thermo Scientific InSight Gen 3 is a remote monitoring and asset management solution that monitors key reliability parameters and uses advanced analytics to provide predictive indicators of possible system failures. InSight consists of Wi-Fi modules (motes), sensors, and software tools that allow you to monitor your laboratory equipment for key performance and reliability parameters and analyze data.