Supplier: NEW ENGLAND SMALL TUBES MS

JTIP COAXIAL DISPENSE COATED

Supplier: SMART TUBE INC MS

PROTEOMIC STABILIZER PROT1 100 TESTS

Supplier: SMART TUBE INC MS

STABILIZER PROTEOMIC PROT1 100 TEST

Supplier: Biosensis

The Lamin proteins are members of the intermediate filament protein family but are located inside the nucleus rather than in the cytoplasm (1). The lamins function as skeletal components tightly associated with the inner nuclear membrane. Originally the proteins of the nuclear cytoskeleton were named Lamin A, B and C, from top to bottom as visualized on SDS-PAGE gels. Subsequently it was found that Lamins A and C were coded for by a single gene (2), while the Lamin B band may contain two proteins encoded by two genes now called Lamin B1 and Lamin B2. Lamin A has a mass of about 74kDa while Lamin C is 65kDa. The Lamin A protein includes 98 amino acids missing from Lamin C, while Lamin C has a C-terminal 6 amino acid peptide not present in Lamin A. Apart from these regions Lamin A and C are identical so that antibodies raised against either protein are likely to cross react with the other, as is the case with this monoclonal. Lamin polymerization and depolymerization is regulated by phosphorylation by cyclin dependent protein kinase 1 (CDK1), the key component of "maturation promoting factor", the central regulator of cell division. Activity of this kinase increases during cell division and is responsible for the breakdown of the nuclear lamina. Mutations in the LMNA gene are associated with several serious human diseases, including Emery-Dreifuss muscular dystrophy, familial partial lipodystrophy, limb girdle muscular dystrophy, dilated cardiomyopathy, Charcot-Marie-Tooth disease type 2B1, and Hutchinson-Gilford progeria syndrome. This family of diseases belong to a larger group which are often referred to as Laminopathies, though some laminopathies are associated in defects in Lamin B1, B2 or one or other of the numerous nuclear lamina binding proteins. A truncated version of lamin A, commonly known as progerin, causes Hutchinson-Gilford progeria syndrome, a form of premature aging (3).

Supplier: 3M Healthcare

3M™ 3MRO401 Under Sink Reverse Osmosis Water Filter System is a multi-stage reverse osmosis water filter system that is NSF listed to reduce particulate, chlorine taste and odor, arsenic, barium, cadmium, chromium (both Hexavalent and Trivalent), copper, parasitic protozoan cysts, fluoride, lead, radium, selenium, p-Dichlorobenzene, TDS and turbidity.

Supplier: Labconco

These enclosures provide practical, economical protection of operator and environment for applications that generate fine dusts or aerosols but do not provide product protection

Supplier: Celestron International

StarSense Explorer is ideal for beginners thanks to the app’s user-friendly interface and detailed tutorials.

Supplier: Biotium

AccuBlue™ and AccuClear™ dsDNA quantitation assays provide sensitive, accurate and easy-to-use dsDNA quantitation assays for fluorescent microplate readers in 96-well or 384-well formats.

Supplier: Lucigen

Clone large fragments with T1-phage resistance.

Supplier: Cube Biotech

AASTYs (Acrylic acid-co-styrenes) - like AASTY 6-55 - are highly-alternating copolymers, well-suited for generating native lipid nanodiscs. They are a 2022 novel developed series for membrane protein solubilization & stabilization. AASTY 6-55 gets its name from its molecular weight and Acrylic Acid : Styrene Ratio. These varying ratios of acrylic acid to styrene contribute to the hydrophilic properties of our AASTYs. In general, lighter AASTYs, like 6-55 tend to be more aggressive, while heavier AASTYs, such as 11-45 show higher thermodynamic stability.

The exact composition of AASTY copolymers shows different extraction efficiency, depending on the lipid composition of the lipid bilayers being formulated into nanodiscs. As AASTY is made by controlled radical polymerization techniques, the dispersity of polymer molecular weight distribution is low, and the molecular weights are controlled. This means that excess AASTY copolymer can be removed by dialysis after nanodisc formation. Based on previous findings on SMA, it is the expectation that AASTY of different molecular weights will display different rates of nanodisc formation, extraction efficacy, and stability of resulting nanodiscs.

Every membrane protein solubilization needs to undergo a screening process before. The characteristic phospholipid environment surrounding the different membrane proteins in question performs differently well with each polymer. To support you in this process, we offer a handy Screening Kit for AASTYs to test them all. Additionally, we recommend the two following publications if you would like to get further information: Smith et al. 2020 & Timcenko et al. 2022

Supplier: Cube Biotech

AASTYs (Acrylic acid-co-styrenes) - like AASTY 11-55 - are highly alternating copolymers, well-suited for generating native lipid nanodiscs. They are a 2022 novel developed series for membrane protein solubilization & stabilization. AASTY 11-55 is named from its molecular weight and Acrylic Acid : Styrene Ratio. These varying ratios of acrylic acid to styrene contribute to the hydrophilic properties of our AASTYs. In general lighter AASTYs, like 6-45 tend to be more aggressive, while heavier AASTYs, such as 11-55 show higher thermodynamic stability.

The exact composition of AASTY copolymers shows different extraction efficiencies, depending on the lipid composition of the lipid bilayers being formulated into nanodiscs. As AASTY is made by controlled radical polymerization techniques, the dispersity of polymer molecular weight distribution is low, and the molecular weights are controlled. This means that excess AASTY copolymer can be removed by dialysis after nanodisc formation. Based on previous findings on SMA, it is the expectation that AASTY of different molecular weights will display different rates of nanodisc formation, extraction efficacy, and stability of resulting nanodiscs.

Every membrane protein solubilization needs to undergo a screening process before. The characteristic phospholipid environment surrounding the different membrane proteins in question performs differently well with each polymer. To support you in this process we offer a handy Screening Kit for AASTYs to test them all. Additionally, we recommend the two following publications if you would like to get further information: Smith et al. 2020 & Timcenko et al. 2022

Supplier: 3M Healthcare

3M™ Water Filtration Products High Flow Series (-S) model filter system provide Recipe Quality Water™ for commercial ice machines and commercial steam tables by reducing the effects of sediment*, chlorine taste and odor and scale* while helping you protect your equipment.

Supplier: Brandtech

The LHS and LHS Flow are compact benchtop automated liquid handlers with intuitive method development software, an outstanding solution for automating common repetitive pipetting tasks. The LHS easily prepares ELISA, PCR, serial dilutions, cherry picking, aliquoting and more. Units provide all the benefits from automation with none of the complexity.

Supplier: Analytik Jena US

The innuPREP RNA Mini Kit is a jack-of-all-trades when it comes to extracting total RNA that is excellent in terms of both quality and quantity.

Supplier: Labconco

These low-profile enclosures provide user protection by keeping powders, particulates, and fumes contained during weighing procedures

Supplier: Cube Biotech

AASTYs (Acrylic acid-co-styrenes) - like AASTY 11-45 - are highly alternating copolymers, well-suited for the generation of native lipid nanodiscs. They are a 2022 novel developed series for membrane protein solubilization & stabilization. AASTY 11-45 gets its name from its molecular weight and Acrylic Acid : Styrene Ratio. These varying ratios of acrylic acid to styrene contribute to the hydrophilic properties of our AASTYs. In general lighter AASTYs, like 6-45 tend to be more aggressive, while heavier AASTYs, such as 11-45 show higher thermodynamic stability.

The exact composition of AASTY copolymers shows different extraction efficiency, depending on the lipid composition of the lipid bilayers being formulated into nanodiscs. As AASTY is made by controlled radical polymerization techniques, the dispersity of polymer molecular weight distribution is low, and the molecular weights are controlled. This means that excess AASTY copolymer can be removed by dialysis after nanodisc formation. Based on previous findings on SMA, it is the expectation that AASTY of different molecular weights will display different rates of nanodisc formation, extraction efficacy, and stability of resulting nanodiscs.

Every membrane protein solubilization needs to undergo a screening process before. The characteristic phospholipid environment surrounding the different membrane proteins in question performs differently well with each polymer. To support you in this process, we offer a handy Screening Kit for AASTYs to test them all. Additionally, we recommend the two following publications if you would like to get further information: Smith et al. 2020 & Timcenko et al. 2022

Supplier: Cube Biotech

AASTYs (Acrylic acid-co-styrenes) - like AASTY 6-50 - are highly-alternating copolymers, well-suited for the generation of native lipid nanodiscs. They are a 2022 novel developed series for membrane protein solubilization & stabilization. AASTY 6-50 gets its name from its molecular weight and Acrylic Acid : Styrene Ratio. These varying ratios of acrylic acid to styrene contribute to the hydrophilic properties of our AASTYs. In general lighter AASTYs, like 6-50 tend to be more aggressive, while heavier AASTYs, such as 11-45 show higher thermodynamic stability.

The exact composition of AASTY copolymers shows different extraction efficiency, depending on the lipid composition of the lipid bilayers being formulated into nanodiscs. As AASTY is made using controlled radical polymerization techniques, the dispersity of polymer molecular weight distribution is low, and the molecular weights are controlled. This means that excess AASTY copolymer can be removed by dialysis after nanodisc formation. Based on previous findings on SMA, it is the expectation that AASTY of different molecular weights will display different rates of nanodisc formation, extraction efficacy, and stability of resulting nanodiscs.

Every membrane protein solubilization needs to undergo a screening process before. The characteristic phospholipid environment surrounding the different membrane proteins in question performs differently well with each polymer. To support you in this process we offer a handy Screening Kit for AASTYs to test them all. Additionally, we recommend the two following publications if you would like to get further information: Smith et al. 2020 & Timcenko et al. 2022

Supplier: Cytiva

illustra™ ExoProStar™ contains illustra™ Alkaline Phosphatase and Exonuclease 1, formulated to work together to remove unincorporated primers and nucleotides from amplification reactions in preparation for sequencing, cloning, genotyping or further DNA modification reactions.

Supplier: Lucigen

Quickly purify high yields of high-molecular-weight genomic DNA, total cellular RNA or Total Nucleic Acid (TNA) with one kit

Supplier: Biosensis

The Lamin proteins are members of the intermediate filament protein family but are located inside the nucleus rather than in the cytoplasm (1). The lamins function as skeletal components tightly associated with the inner nuclear membrane. Originally the proteins of the nuclear cytoskeleton were named Lamin A, B and C, from top to bottom as visualized on SDS-PAGE gels. Subsequently it was found that Lamins A and C were coded for by a single gene (2), while the Lamin B band may contain two proteins encoded by two genes now called Lamin B1 and Lamin B2. Lamin A has a mass of about 74kDa while Lamin C is 65kDa. The Lamin A protein includes 98 amino acids missing from Lamin C, while Lamin C has a C-terminal 6 amino acid peptide not present in Lamin A. Apart from these regions Lamin A and C are identical so that antibodies raised against either protein are likely to cross react with the other, as is the case with this monoclonal. Lamin polymerization and depolymerization is regulated by phosphorylation by cyclin dependent protein kinase 1 (CDK1), the key component of "maturation promoting factor", the central regulator of cell division. Activity of this kinase increases during cell division and is responsible for the breakdown of the nuclear lamina. Mutations in the LMNA gene are associated with several serious human diseases, including Emery-Dreifuss muscular dystrophy, familial partial lipodystrophy, limb girdle muscular dystrophy, dilated cardiomyopathy, Charcot-Marie-Tooth disease type 2B1, and Hutchinson-Gilford progeria syndrome. This family of diseases belong to a larger group which are often referred to as Laminopathies, though some laminopathies are associated in defects in Lamin B1, B2 or one or other of the numerous nuclear lamina binding proteins. A truncated version of lamin A, commonly known as progerin, causes Hutchinson-Gilford progeria syndrome, a form of premature aging (3).

Supplier: Promega Corporation

Silica Membrane-based Wizard® Plus SV Minipreps System isolates plasmid DNA.

Supplier: Analytik Jena US

The innuPREP Micro RNA Kit allows researchers to isolate small RNA molecules and achieve high yields.

Supplier: Cube Biotech

Sulfo-DIBMA is an electroneutral modification of existing DIBMAs. It does not interfere with charge-sensitive interactions between proteins and lipids. This innovation opens up a wider range of experimental research in terms of charge-sensitive membrane protein processes like protein-protein and protein-lipid interactions. In addition, Sulfo-DIBMA belongs to a new generation of DIBMA’s which are RAFT polymerized. This achieves a reduction in both monomer size and greater monodispersity. With diisobutylene-maleic acid (DIBMA), you can directly extract membrane proteins from cells without an intermediate step of detergent solubilization, like with SDS, which would usually interfere with the protein's function. Another advantage of DIBMA is the lack of an absorbance maxima at 280 nm. SMAs, in comparison, usually interfere with protein quantification, as aromatic amino acids absorb at the same spectrum.
Another significant advantage of Sulfo polymers compared to other polymers is the wide pH range in which they remain stable. The buffer in which the polymer is supplied has a pH of 7.5, but the polymer itself remains stable between pH 4 and pH 10. The special physicochemical properties of Sulfo-DIBMAs make them ideal for cryo-TEM and other downstream applications.
Good publications to find details about Sulfo-DIBMA and Sulfo-SMA are:
Oluwole et al. (2017)
Glueck et al. (2022)
Janson et al. (2022)
Eggenreich et al. (2023)

Supplier: Cube Biotech

AASTYs (Acrylic acid-co-styrenes) - like AASTY 6-45 - are highly alternating copolymers, well-suited for generating native lipid nanodiscs. They are a 2022 novel developed series for membrane protein solubilization & stabilization. AASTY 6-45 gets it's name from its molecular weight and Acrylic Acid : Styrene Ratio. These varying ratios of acrylic acid to styrene contribute to the hydrophilic properties of our AASTYs. In general lighter AASTYs, like 6-45 tend to be more aggressive, while heavier AASTYs, such as 11-45 show higher thermodynamic stability.

The exact composition of AASTY copolymers shows different extraction efficiency, depending on the lipid composition of the lipid bilayers being formulated into nanodiscs. As AASTY is made by controlled radical polymerization techniques, the dispersity of polymer molecular weight distribution is low, and the molecular weights are controlled. This means that excess AASTY copolymer can be removed by dialysis after nanodisc formation. Based on previous findings on SMA, it is the expectation that AASTY of different molecular weights will display different rates of nanodisc formation, extraction efficacy, and stability of resulting nanodiscs.

Every membrane protein solubilization needs to undergo a screening process before. The characteristic phospholipid environment surrounding the different membrane proteins in question performs differently well with each polymer. To support you in this process we offer a handy Screening Kit for AASTYs to test them all. Additionally, we recommend the two following publications if you would like to get further information: Smith et al. 2020 & Timcenko et al. 2022

Supplier: REVVITY HEALTH SCIENCES, INC.

The CRISPRclean® stranded total RNA prep with rRNA depletion (HMR) is a total RNA library prep leveraging a CRISPR-powered workflow facilitating the detection of lower expressing and biologically relevant transcripts from complex samples.

Supplier: Zymo Research

The ZR BAC DNA miniprep kit is for efficient isolation of BAC plasmid DNA and other large plasmids (e.g., PAC) from E. coli cell lysates.

Supplier: Omega Bio-Tek

RNA-Solv® Reagent is a one reagent system for the isolation of total RNA from cells and tissues. The reagent, a single-phase solution consisting of phenol and guanidine isothiocyanate, is a modification of the single-step RNA isolation method developed by Chomczynski and Sacchi. The sample is homogenised and lysed in RNA-Solv® Reagent, which maintains the integrity of the RNA while disrupting and denaturing endogenous RNases and other cellular components. Extraction of the lysate with chloroform further denatures proteins and separates the mixture into an organic and an aqueous phase. RNA remains exclusively in the aqueous phase, and is subsequently recovered by isopropanol.

Supplier: Labconco

These enclosures provide practical, economical protection of operator and environment for applications involving biohazardous material and toxic particulates

Supplier: Enzo Life Sciences

Quick, easy kit for purifying DNA from PCR, gels and labeling reactions for a variety of downstream applications.

Supplier: IBI Scientific

The Soil DNA Extraction Kit was designed for rapid isolation of genomic DNA from microorganisms such as bacteria, archaea, fungi, and algae in soil samples.