1519 Results for: "Hoods"

Supplier: MONASHEE MANUFACTURING

Furnace cap hoods are designed to capture the lead fumes from your MAS3 fusion or cupellation furnaces. Designed for fire assay applications, our furnace cap hoods have a 10" flange for connecting to existing duct work and are required to be connected to an appropriately sized dust collector and a scrubber as required (items sold separately, contact us for more information).

Supplier: Kewaunee

Fume hood worktop, 304L stainless steel without cupsink.

Supplier: Labconco

Designed for classroom use, these lightweight hoods feature an epoxy-coated aluminum frame with tempered safety glass front sash, sides, rear baffle, and top.

Supplier: Bel-Art Products, a Part of SP

Designed for small facilities or installations in which fume hoods are needed, this unit is excellent for use in schools, junior colleges and universities.

Supplier: MONASHEE MANUFACTURING

A six-foot wide dust hood complete with discharge chute. Slagging hoods effectively capture and collect dust while providing uniform airflow, a clean work surface and protecting the operator from contaminants. These slagging hoods have a convenient steel post with a steel pad to hammer your lead buttons to remove the slag. There is also a chute where the slag is deposited for disposal. Designed for industrial and mining applications, our slagging hoods have a 10” flange for connecting to existing duct work and are required to be connected to an appropriately sized dust collector (sold separately, contact us for more information).

Supplier: Labconco

Ideal for rooms with shallow countertops or ceilings below 8', these hoods are constructed of sturdy, epoxy-coated steel both inside and out.

Furnished with a 3/16" tempered safety glass counterbalanced sash and duct collar, the hoods ensure your students’ safety. A removable front panel and air foil, vapor-proof interior light, and two-piece adjustable baffle make for easy access and convenient use.

The right side fixture is factory prepared to accept up to three service fixtures, one duplex electrical receptacle, and air monitor. The side wall is factory prepared for a wall-mounted cupsink with turret. Hoods are available in two model types – Basic 47 Hoods with a 4' nominal width are designed as an individual lab station,

Basic 70 Hoods are 6' in width and spacious enough to accomodate numerous samples or workstations.

Both models are available with or without a blower. Blowers may be mounted in or above the hood, or on the roof. Basic 47 hoods that include a blower have a 3/4 hp motor.

Note: Worksurface, base cabinet, and blower are required for operation, and sold separately.

For assistance, contact your local sales representative

Supplier: Air Science

Purair® Basic ductless fume hoods are designed to provide high level performance features at an affordable price.

Supplier: VWR International

General purpose fume hoods that meet the typical needs of a research environment, while maintaining a level of flexibility. Ready for quick delivery through the REDISHIP program.

Supplier: Labconco

Popular models of Protector XStream Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment

Supplier: Bel-Art Products, a Part of SP

These corrosion-proof polypropylene plastic exhaust hoods are designed to rest on the rear edge of tanks and draw a stream of air across the top of the tank away from the operator.

Supplier: Labconco

Kits include electrical receptacle, junction box, receptacle cover plate, and installation instructions

Supplier: Kewaunee

The Supreme Air Venturi provides the safest user-friendly fume hood manufactured today. The Supreme Air Venturi utilizes proven containment enhancing techniques coupled with innovative laboratory convenience features, including: adjustable LED lights, electromechanical sash stops, ultra-smooth sash system, and push button sash management.

Supplier: HEMCO CORPORATION

This self-contained hood unit comes equipped with an integral exhaust blower and carbon filter, which do not require duct or venting to the outside. Small quantities of solvents, acids, and odors are quickly absorbed in an activated carbon filter which recirculates air back into the room, thus avoiding installation and energy cost. Hood is ideal for laboratories that require multiple locations or where space is limited. Equipped with 115V exhaust blower, vapor proof light switch, and power cord, unit is fully assembled. Filters, worksurface, and base stands are available separately.

Supplier: Labconco

Solid epoxy work surfaces are 3.2cm (1¹/₄") thick, 65.7cm (25⁷/₈") deep, and dished to contain spills.

Supplier: Air Control

Polypropylene fume hoods are designed for full operator protection and continuous, easy access to the hood interior

Supplier: Air Science

Mobile base stands for ductless fume hoods.

Supplier: Labconco

Required and replacement accessories for Protector filtered fume hoods. These accessories are for use with Labconco Protector Echo® and Airo® filtered fume hoods. For all filters and prefilters: The number of filters/prefilters required depends on the width of the hood and if it is an initial order or a replacement order.

Supplier: Labconco

These kits let the user mount glassware and other small apparatus to the rear of the hood’s interior, above the work surface to maximize usable working area.

Supplier: Labconco

Kit includes a 7.6x15.2cm (3x6") polypropylene cupsink and chrome turret

Supplier: Labconco

There are many accessories available for customizing Protector® Laboratory Hoods including Service Fixture Kits, Duplex Receptacle Kits and Guardian™ Airflow Monitors.

Supplier: Air Science

Spillage tray for ductless fume hoods.

Supplier: Kewaunee

These modified epoxy resin worktops are available with or without a 5.1cm (2") diameter vent hole

Supplier: VWR International

These remote control fittings consist of a brass angle valve with replaceable seat, a nylon color-coded panel flange with angle serrated hose connector (except VFT-0864-3WV, which features a gooseneck), a remote control rod assembly with a plastic color-coded four-arm handle, black plastic angle flange, and a tank nipple, locknut, and washer

Supplier: Labconco

No cutouts, for 8Feet Protector XStream Hood with Eco-Foil air foil, 96Inch w x 36Inch l x 1.25Inch thick.

Supplier: Microzone

Extraction HEPA/Carbon series of extraction hoods provides with the highest level of operator and environmental protection from harmful particulates and chemicals.

Supplier: General Data Healthcare

A clean air workplace is essential in today’s health conscious environment

Supplier: WaterSaver Faucet

Since isotope hoods do not have interior access panels, they require a front load fitting that can be accessed from outside the hood

Supplier: VWR International

Chemical resistant epoxy resin work surface designed specifically for the VWR® fume hood.

Supplier: Kewaunee

Venturi fume hood worktop can be used wherever optimum physical and chemical resisting properties are required.

Supplier: Air Science

Side wall mounted air flow indicator for ductless fume hoods.