47 Results for: "Embedding Kits, Electron Microscopy Sciences"

Supplier: Electron Microscopy Sciences

A water soluble embedding media which is based on Glycol Methacrylate (GMA) plastic embedding. It is intended for use in preparing samples for high resolution microscopes (HRLM). The catalyzed monomer acts as a dehydration and infiltration agent. Therefore, complete dehydration through 100% ethanol is not necessary although recommended for large or dense tissues. Conventional paraffin sections have a greater degree of shrinkage and produce inadequate morphology when compared to JB-4.JB-4 Kit Consists of 800 mL Solution A, 30 mL Solution B, and 12 g Catalyst.

Supplier: Electron Microscopy Sciences

The same advantages offered by EPON 812, are offered by EMbed 812: rapid penetration, greater contrast, easy sectioning, stability under the electron beam, satisfactory staining of most thick sections for light microscopy and thin sections for electron microscopy.

Supplier: Electron Microscopy Sciences

JB-4 Plus offers all of the same features as JB-4 except it produces less of an exothermic reaction than JB4 which is good for temperature sensitive tissues

Supplier: Electron Microscopy Sciences

This mixture is less viscous than the final embedding mixture of EMbed-812.

Supplier: Electron Microscopy Sciences

See your samples and your embeddings in a whole new light!

Supplier: Electron Microscopy Sciences

Trypsin is used for proteolytic digestion of formalin-fixed paraffin-embedded (FFPE) tissue sections prior to application of antibodies.

Supplier: Electron Microscopy Sciences

Quetol 651 - NSA is a water miscible epoxy resin used for both light and electron microscopy. Its low viscosity permits easy infiltration and embedding, and yields light-colored blocks.

Supplier: Electron Microscopy Sciences

Paraffin tissue microarrays (TMAs) are becoming more common in the laboratories. The DVD instruction is accompanying with each kit, will step by step guide you to perform through the entire TMAs process. Arraymold features include:

Supplier: Electron Microscopy Sciences

DGD is a removable embedding medium (for thin and thick sections) that provides embedment free sections

Supplier: Electron Microscopy Sciences

XTEM TEM Sample Preparation Kit is specifically for the preparation of cross-sectional TEM (XTEM) specimens

Supplier: Electron Microscopy Sciences

Thermoplastic gluing under stereo microscopes.

Supplier: Electron Microscopy Sciences

Provides excellent penetration for embedding biological tissues and rapid infiltration. Easy to prepare. The hardness is adjusted by changing the proportion of the flexibilizer (DER 736). The blocks have good trimming and sectioning qualities. Thin sections are tough under the electron beam.

Supplier: Electron Microscopy Sciences

The kit consists of two components, equal amount, very low viscosity, (~65 cps), in convenient dispenser top bottles. To prepare the embedding resin, just mix equal amounts of the two components. The resin readily infiltrates into specimen and polymerizes to a clear, hard block overnight at 60°C.

Supplier: Electron Microscopy Sciences

Due to the supply shortage of ERL-4206, ERL-4221 has now been specially formulated to replace it. ERL 4206 is one of the main components of the low viscosity (Dr. Spur) embedding resin kit.

Supplier: Electron Microscopy Sciences

Also known as American Araldite.

Supplier: Electron Microscopy Sciences

Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range of embedding conditions. These resins provide low viscosity at low temperatures.

Supplier: Electron Microscopy Sciences

Hechman, C.A

Supplier: Electron Microscopy Sciences

HPMA is a water-soluble resin used for cytochemical applications

Supplier: Electron Microscopy Sciences

Luft's Formula.

Supplier: Electron Microscopy Sciences

Histocryl acrylic resin has been specially formulated for light microscopy. It is water clear, and because it is hydrophilic (polar) it permits the use of most routine staining techniques without priorremoval or etching.

Supplier: Electron Microscopy Sciences

Hard-Plus Resin-812 is supplied only as a premix kit

Supplier: Electron Microscopy Sciences

Technovit® 4000 is the low shrinkage embedding medium

Supplier: Electron Microscopy Sciences

Kit consists of: 450 mL Glycol methacrylate, GMA, 225 mL n-Butyl methacrylate, 50 mL Ethylene glycol dimethacrylate, 15g Benzoyl Peroxide Paste, and 20 mL Polyethylene Glycol 400.

Supplier: Electron Microscopy Sciences

The mixture of Butyl and Methyl Methacrylate offers many advantages over the standard GMA and HPMA embedding mediums

Supplier: Electron Microscopy Sciences

Kit consists of 500 mL LR Gold Resin, 100g Polyvinylpyrolidone; 50g Benzoyl Peroxide, and 50g Benzil.

Supplier: Electron Microscopy Sciences

LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It has a very low viscosity (8cps), is non-toxic resin, and is suitable for both Light and Electron Microscopy.

Supplier: Electron Microscopy Sciences

The same as our Lowicryl complete kits but this new formulation allows you one stop embedding without all of the cumbersome preparation and mixing.  This pre-mixed, ready to use resin, saves you time and minimizes chemical contact.  MonoStep Lowicryl is ideal for use in immunohistochemistry and immunolabeling.  Store at room temperature.

Supplier: Electron Microscopy Sciences

The grid stick is coated with a specially-formulated pressure- sensitive adhesive.

Supplier: Electron Microscopy Sciences

An aromatic polyepoxide; a colorless resin of relatively low viscosity, with virtually no shrinkage.

Supplier: Electron Microscopy Sciences

Chemkit is arranged to enable a laboratory to perform standard preparations of biological specimens.