Wall-Mounted Autopsy Stations, Mortech®
About this item
All stainless steel stations feature heliarc-welded seams and joints that are ground polished to a smooth finish.
- Plumbing and electrical lines are factory installed and require only minimal installation
- All inside corners have large radii for easy cleaning and effective sanitation
- The reverse flow feature instantly relieves suction clogging by providing a reverse pressure of water
- Hot/cold water fixture features a gooseneck faucet and wrist-blade handles
Large, single compartment sinks feature a heavy-duty ¹/₂ hp commercial waste disposal. Sinks are 86.4 cm (34") wide and feature a deluxe aspirator and vacuum beaker with reverse flow for additional waste removal. A locking mechanism with a slide latch secures carts to the sink; mechanism can be accessed from either side of the carrier. Stations feature a 111.8 cm (44") wide dissecting area next to the sink and a 30.5 cm (12") deep specimen shelf on top. The dissecting area rinse assembly and the spray hose assembly feature cold water control valves. Spray hose assembly has a nozzle and 3 m (10') of flexible hose. Stations are equipped with two waterproof GFCI outlets and a waterproof switch for the waste disposal. A large instrument drawer is located below the dissecting area on the right and left sink models; center sink model features two dissecting areas and two instrument drawers.
Note: Specified dimensions reflect total height when unit is installed with countertop area 86.4 cm (34") above the floor.
Ordering information: Plumbing fixtures can be located in various positions; please specify requirements when ordering. Optional features such as eyewash assemblies, gas/air valves, and light fixtures are available. Contact your Avantor representative for more information.
0 Options Available Below
Product Details & Documents
All stainless steel stations feature heliarc-welded seams and joints that are ground polished to a smooth finish.
- Plumbing and electrical lines are factory installed and require only minimal installation
- All inside corners have large radii for easy cleaning and effective sanitation
- The reverse flow feature instantly relieves suction clogging by providing a reverse pressure of water
- Hot/cold water fixture features a gooseneck faucet and wrist-blade handles
Large, single compartment sinks feature a heavy-duty ¹/₂ hp commercial waste disposal. Sinks are 86.4 cm (34") wide and feature a deluxe aspirator and vacuum beaker with reverse flow for additional waste removal. A locking mechanism with a slide latch secures carts to the sink; mechanism can be accessed from either side of the carrier. Stations feature a 111.8 cm (44") wide dissecting area next to the sink and a 30.5 cm (12") deep specimen shelf on top. The dissecting area rinse assembly and the spray hose assembly feature cold water control valves. Spray hose assembly has a nozzle and 3 m (10') of flexible hose. Stations are equipped with two waterproof GFCI outlets and a waterproof switch for the waste disposal. A large instrument drawer is located below the dissecting area on the right and left sink models; center sink model features two dissecting areas and two instrument drawers.
Note: Specified dimensions reflect total height when unit is installed with countertop area 86.4 cm (34") above the floor.
Ordering information: Plumbing fixtures can be located in various positions; please specify requirements when ordering. Optional features such as eyewash assemblies, gas/air valves, and light fixtures are available. Contact your Avantor representative for more information.