You searched for: Environmental Test Kits

Supplier: CHEMetrics

Film-forming amines, also known as FFAP or FFP, are chemicals applied in high-pressure boilers, cooling systems, and HRSGs to guard against corrosion and reduce the presence of corrosive agents. The K-1013 test kit utilizes the Rose Bengal method to detect and measure these substances in boiler water or steam condensate.

Supplier: CHEMetrics

The Titrets® test uses a ceric sulfate titrant with ferroin indicator. Depending on the procedure used, this kit can determine H2O2 concentrations from 0.01% to as high as 20%.

Supplier: HANNA INSTRUMENTS

This chemical test kit for the determination of six parameters commonly monitored for aquaculture testing: alkalinity, carbon dioxide, hardness, dissolved oxygen, pH, and salinity. This kit is equipped with all the necessary reagents and equipment to perform over 100 tests for each parameter. pH is obtained with Hanna's pH tester, which guarantees greater accuracy and a longer life than traditional litmus paper.

Supplier: HANNA INSTRUMENTS

High quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements.

Supplier: CHEMetrics

This product is a refill for K-4815 Glycol CHEMets visual kit for the analysis of glycol in water. It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-4815 Glycol CHEMets refill is compatible with C-4815 glycol comparator.

Supplier: CHEMetrics

This product is a refill for K-3810 Cyanide (free) CHEMets visual kit for the analysis of cyanide in water. It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-3810 Cyanide CHEMets refill is compatible with C-3801 low range cyanide comparator and C-3810 high range copper comparator.

Supplier: CHEMetrics

This product is a refill for K-9011 Silica ULR CHEMets visual kit for the analysis of silica in water. It contains 30 self-filling ULR CHEMets ampoules packaged securely in cardboard trays and box. R-9011 Silica ULR CHEMets refill is compatible with C-9011 Silica ULR comparator.

Supplier: CHEMetrics

This product is a refill for K-7404 Ozone CHEMets visual kit for the analysis of ozone in water. It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-7404 Ozone CHEMets refill is compatible with C-7404 low range ozone comparator and C-7405 high range ozone comparator.

Supplier: CHEMetrics

For preparation of 0.5 ppm standard. CHEMetrics® hydrogen peroxide standard (A-5505) offers the analyst an easy method to confirm the accuracy and reliability of hydrogen peroxide measurements. Conveniently packaged in a cardboard box, each pack contains 10 ampoules, a tip breaking tool and a lot-specific Certificate of Analysis. To prepare the 0.5 ppm standard, simply dispense liquid from the double-tipped ampoule and dilute to 100 ml.The 0.5 ppm standard will remain stable for 24 hours in a closed flask that is stored in the dark at room temperature.

Supplier: LaMotte

Refill of Nitrate Testabs used in LaMotte kits.

Supplier: Macherey-Nagel

For semi-quantitative determinations

Supplier: CHEMetrics

CHEMets® Chlorine Dioxide Visual Test

Supplier: CHEMetrics

Ozone Instrumental Test 0 to 0.25 ppm

Supplier: CHEMetrics

CHEMets® Chlorine Visual HR Test 0 to 500 ppm

Supplier: CHEMetrics

CHEMets® Hydrazine HR Visual Test Kit 0 to 12.5 ppm

Supplier: CHEMetrics

CHEMets® Hydrogen Peroxide Visual Test Kit 0 to 0.5 ppm

Supplier: LaMotte

Sulfide test kit is used as a test for sulfide using the octa-slide 2 comparator.

Supplier: Macherey-Nagel

For semi-quantitative determinations

Supplier: Macherey-Nagel

Quantofix Chlorine Sensitive test strips for the semi-quantitative determination of total chlorine.

Supplier: Macherey-Nagel

Quantofix Molybdenum test strips and reagents for the semi-quantitative determination of molybdenum.

Supplier: CHEMetrics

CHEMets® Monochloramine Visual Test 0 to 20 ppm

Supplier: Macherey-Nagel

A pre-dosed NANOCOLOR® tube test for photometric determination of phenol in water.

Supplier: Macherey-Nagel

A pre-dosed NANOCOLOR® tube test for photometric determination of cadmium in water.

Supplier: LaMotte

Precalibrated test tubes and labware give fast, accurate results on-site, in the classroom, or in the lab.

Supplier: Macherey-Nagel

A range of pre-dosed NANOCOLOR® tube tests for photometric determination of formaldehyde in water.

Supplier: Macherey-Nagel

A pre-dosed NANOCOLOR® tube test for photometric determination of chlorine dioxide in water.

Supplier: Macherey-Nagel

A pre-dosed NANOCOLOR® tube test for photometric determination of nitrite (NO₂^-) in water.

Supplier: Macherey-Nagel

A pre-dosed NANOCOLOR® tube test for photometric determination of ortho- and total phosphate in water.

Supplier: CHEMetrics

Range: 0 to 1.55% as NaOClMDL: 0.3%. Method: DPD (hypochlorite).

Supplier: CHEMetrics

This kit requires the use of the V-2000 or V-3000 Photometer, a SAM Photometer or a spectrophotometer capable of accepting a 13 mm diameter round cell.