You searched for: Environmental Test Kits

Supplier: CHEMetrics

CHEMets® Hydrogen Peroxide HR Visual Test Kit 125 to 1250 ppm

Supplier: Macherey-Nagel

Quantofix Potassium test strips and reagents for the semi-quantitative determination of potassium (K +) in solutions.

Supplier: CHEMetrics

Chromate Instrumental Test 0 to 3.50 ppm

Supplier: CHEMetrics

MiniPet is a registered trademark of Tricontinent Scientific, Inc.

Supplier: Macherey-Nagel

A pre-dosed NANOCOLOR tube test for photometric determination of BOD₅ in water.

Supplier: Macherey-Nagel

Quantofix Peracetic Acid test strips for the semi-quantitative determination of peracetic acid.

Supplier: CHEMetrics

Iron Total Ferrous Instrumental Test

Supplier: Macherey-Nagel

A pre-dosed NANOCOLOR tube test for photometric determination of cyanide in water.

Supplier: CHEMetrics

Nitrate Instrumental Test Zinc Reduction

Supplier: Macherey-Nagel

A pre-dosed NANOCOLOR® tube test for photometric determination of sulphite in water.

Supplier: Macherey-Nagel

A pre-dosed NANOCOLOR® tube test for photometric determination of hydrocarbons in water.

Supplier: Macherey-Nagel

A range of pre-dosed NANOCOLOR® tube tests for photometric determination of ethanol in water.

Supplier: CHEMetrics

CHEMets® Iron Total Soluble HR Visual Test Kit 250 to 2500 ppm

Supplier: Macherey-Nagel

A pre-dosed NANOCOLOR® tube test for photometric determination of organic acids in water.

Supplier: Macherey-Nagel

A pre-dosed NANOCOLOR® tube test for photometric determination of Kjeldahl nitrogen in water.

Supplier: CHEMetrics

Test kits employ the PDMAB, paradimethylaminobenzaldehyde chemistry. PDMAB in acid solution reacts with hydrazine to form a yellow product.

Supplier: CHEMetrics

This kit uses the EGTA chemistry to measure the hardness of water by measuring the dissolved calcium in the water.

Supplier: HANNA INSTRUMENTS

This chemical test kit uses an adaptation of the Nessler method to measure ammonia in fresh water. The test kit is supplied complete with all of the reagents and equipment necessary to perform approximately 25 tests.

Supplier: HANNA INSTRUMENTS

This chemical test kit that uses the phenanthroline method to measure total iron in the medium range. This chemical test kit is supplied complete with all of the reagents and equipment necessary to perform approximately 50 tests.

Supplier: HANNA INSTRUMENTS

The HI3831F is a chemical test kit that uses the DPD method to measure free chlorine. The HI3831F is supplied complete with all of the reagents and equipment necessary to perform approximately 50 tests.

Supplier: LaMotte

The Lamotte Chlorine Colorimeter Kit, ideal for both field and lab use, covers the entire critical chlorine range of 0-4 ppm with an MDL of 0.03 ppm.

Supplier: LaMotte

Chlorine pH test kit is used for testing for free available chlorine, monochloramine, dichloramine, total residual chlorine, and pH using DPD tablets, phenol red tables and the octa-slide 2 comparator.

Supplier: CHEMetrics

CHEMetrics test kits measure total acid soluble sulfides and employ the methylene blue methodology. Sulfides react with dimethyl-p-phenylenediamine in the presence of ferric chloride to produce methylene blue.

Supplier: CHEMetrics

Vacu-vials Kits require the use of the V-2000 Photometer or a spectrophotometer capable of accepting a 13 mm diameter round cell. Instrument sold separately. Although the test kit contains 30 ampoules, a fresh reagent ampoule blank must be prepared for each series of tests; therefore, the number of samples that can be tested with each kit will vary from a maximum of 29 to a minimum of 15.

Supplier: CHEMetrics

Features of titrets technology: Dependable, sealed single-use titrants Fast, easy procedure, no need to count drops No burettes or other equipment necessary Perform a titration ANYWHERE

Supplier: CHEMetrics

The test kits utilize CHEMetrics Titrets® ampoules. Titrets ampoules use a reverse titration technique to measure analyte concentration levels (titrant volume inside the ampoule is fixed while the sample volume is varied).

Supplier: CHEMetrics

This product is a refill for K-6720 molybdate CHEMets visual kit for the analysis of molybdate in water. It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-6720 molybdate CHEMets refill is compatible with C-6720 molybdate comparator.

Supplier: CHEMetrics

The K-6020D Iron (total and soluble) HR CHEMets® test kit (10 to 100 ppm) comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): HR CHEMets® refill, flat comparator, 25 ml sample cup, 3.0 ml syringe, iron activator solution, and instructions. Note: Kit contains only enough activator solution to perform approximately 7 total iron tests.

Supplier: Lovibond

pH Test Kit for Soil, Lovibond®

Supplier: CHEMetrics

Comparators for CHEMets® Test Kits