You searched for: Microscopy and staining reagents

Supplier: Electron Microscopy Sciences

A mixture of xylene - mixed isomers and non hazardous ingredients to offer a very good synthetic mountant. Once dried the refractive index is 1.58.

Supplier: Electron Microscopy Sciences

This butyl acetate and acrylic resin mixture is the first mounting medium developed for coverslipping directly from d-limonene based clearants. Superior results are also with xylene. CitraMount® medium is recommended for manual coversliping only as it may cause damage to the valves of automated coverslippers.

Supplier: Electron Microscopy Sciences

This electrically conductive silver epoxy is used for adhering samples, as well as many other purposes.

Supplier: Biotium

Wet-set antifade mounting medium for preserving fluorescence of our CF® dyes and other fluorochromes, in a dropper bottle for easy dispensing.

Supplier: Electron Microscopy Sciences

Fluoro Gel with antifading agent 1, 4-Diazobicyclo-(2,2,2-octane (DABCO™) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Alexa fluoro 488, Alexa fluoro 594, Cy dyes, tetramethyly rhodamine, and Redox. The fluorescence is retained during prolonged storage at 4°C in the dark.

Supplier: Genetex

The PAP pen is a special marking pen that provides a thin film-like green-tinged hydrophobic barrier when a circle is drawn around a specimen on a slide

Supplier: Polysciences Inc

JB-4 Plus® is a unique polymer embedding system that provides a higher level of morphological detail than paraffin processed tissues

Supplier: AAT Bioquest

FluoroQuest™ TSA/PSA Antifade mounting medium is the only mounting medium that is optimized for tyramide (TSA) and styramide (PSA)-based fluorescence imaging applications.

Supplier: Electron Microscopy Sciences

Provides excellent penetration for embedding biological tissues and rapid infiltration. Easy to prepare. The hardness is adjusted by changing the proportion of the flexibilizer (DER 736). The blocks have good trimming and sectioning qualities. Thin sections are tough under the electron beam.

Supplier: Electron Microscopy Sciences

MWM100 Black Wax is designed for use as a masking material in jet polishing applications. As it is chemically inert, it is resistant to etching solutions such as hydrofluoric acid, perchloric acid and acetic acid. While it is resistant to many acids, it can be easily removed with hydrocarbon or chlorinated solvents.

Supplier: Electron Microscopy Sciences

MWS052 is a tan colored wax, which is translucent on thin films. Softness makes it most useful with abrasive slurry cutting of materials. Best suited to non-porous surfaces such as glass or polished metal with a reasonably large area. Easily soluble in a variety of solvents.

Supplier: Electron Microscopy Sciences

Until now, LR White has been the most commonly used embedding media for materials due to the block hardness it offered, but there are difficulties associated with LR White

Supplier: WORLD PRECISION INSTRUMENTS LLC

Vetbond is an n-butyl Cyanoacrylate adhesive that quickly and conveniently closes minor wounds. It cures in seconds after contact with tissue and body fluids and binds wound edges together so natural healing can occur.

Supplier: AAT Bioquest

FluoroQuest™ with DAPI is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.

Supplier: AAT Bioquest

When proteins are conjugated to fluorescent organic dyes, fluorescence emission of the dye molecules is usually decreased, sometimes up to 50 to 70%.

Supplier: Electron Microscopy Sciences

Fixative/decalcifier prevents loss of cellular structure and enhances hematoxylin staining.

Supplier: Electron Microscopy Sciences

Permabond 910 is a tissue adhesive.

Supplier: Electron Microscopy Sciences

McDowell Trumps Fixative

Supplier: G-Biosciences

Xylene S is recommended to use in Wheatley Trichrome Stain Kit.

Supplier: Electron Microscopy Sciences

LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It has a very low viscosity (8cps), is non-toxic resin, and is suitable for both Light and Electron Microscopy.

Supplier: Electron Microscopy Sciences

The grid stick is coated with a specially-formulated pressure- sensitive adhesive.

Supplier: Electron Microscopy Sciences

Ethanol, formalin, glacial acetic acid, distilled water.

Supplier: Electron Microscopy Sciences

This EMS Conductive Gold-Paste is a one part adhesive.

Supplier: Aladdin Scientific

Immersion oil for microscopy

Supplier: KPL

Fluorescent Mounting Media is glycerol-based and optically clear liquid for immunofluorescence microscopy

Supplier: Electron Microscopy Sciences

Histosol™ is the original high flash point (114°F TCC) histological clearing agent.

Supplier: Electron Microscopy Sciences

Handy pellet form melts rapidly.

Supplier: Electron Microscopy Sciences

A unique embedding primer.

Supplier: Electron Microscopy Sciences

Paraformaldehyde-glutaraldehyde solution (karnovsky's fixative) is ready to mix.

Supplier: Electron Microscopy Sciences

For some tissues, the use of formalin (contains 10 – 15% Methanol) is not suitable, we offer the alternative formaldehyde (prepared from paraformaldehyde – contains no methanol) for your convenience.