You searched for: Fittings and Connectors

Supplier: Restek

These adapters make a minimum-volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco® zero-dead-volume fitting.

Supplier: Trajan Scientific and Medical

SGE understands today’s chromatographers need to move from tubing based flow systems to planar microchannel systems to deliver flexible chromatography solutions

Supplier: Restek

Silicone or glass capillary column caps can be attached to the column in seconds to form an airtight seal.

Supplier: BIOPTECHS INC.

The white, top portion of a FCS2® that is equipped with 0.5 mm I.D

Supplier: BD

Multipurpose catheter adapter provide a threaded, female BD Luer-Lok™ connection to tubing and can be used for general catheterization techniques

Supplier: Thermo Fisher Scientific

Nalgene Replacement coupling inserts support one handed connection and disconnection when applied to mating couple bodies

Supplier: Restek

Restek is pleased to offer the reusable EXP® fitting system from Optimize Technologies for the ultimate in easy, reliable LC connections.

Supplier: BIOPTECHS INC.

The Stable "Z"® Nikon Stage Adapter is a 108 mm round glass plate with an electronically heated metal plate in its center to fit a Nikon microscope stage where biological specimens are placed for observation.

Supplier: Restek

PTV inlet adapter kits are suitable for 0.25 mm and 0.32 mm ID columns.

Supplier: BIOPTECHS INC.

The FCS2® Cooling Adapter is an O-Ring sealed window that circulates an isolated cooled fluid over the upper glass element (Microaqueduct slide) to cool the specimen to desired temperature

Supplier: Colder Products

HFC35 series polysulfone couplings are able to withstand demanding applications and feature physical strength, chemical resistance and autoclavability.

Supplier: Restek

Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.

Supplier: Restek

Fluid resistor technology eliminates adjustments to capillary tubing for optimizing split ratio. Wide range of interchangeable resistors available.

Supplier: Vernier Software & Technology

This adapter facilitates the connection between an Oxygen Gas Sensor and a Spirometer. Measures the oxygen gas concentration and flow rate of exhaled air.

Supplier: Restek

Use micropacked inlet conversion kits to convert capillary GC split/splitless inlets for use with ¹/₁₆" OD micropacked columns.

Supplier: Colder Products

NSH Series couplings are general purpose versions of our pressure-balanced, non-spill, ChemQuik® CQG couplings. Their non-spill design virtually eliminates spills, minimizes downtime and enhances operator safety in a very low-cost package.

Supplier: Optimize

OPTI-LOK LP Fittings are an excellent choice for making low-pressure connections into ¹/₄-28 ports. Connections to flat-bottomed ports can be made using OPTI-LOK flat-bottomed ferrules for ¹/₁₆ or ¹/₈" tubing without the need for pre-flanged tubing ends. OPTI-LOK LP Fittings are precision machined to deliver leak-free, zero-dead-volume connections every time. We also offer ¹/₄-28 unions in various through-hole sizes for joining flat-bottom fittings.

Supplier: Colder Products

Steam-Thru II Connections offer the flexibility of "steam on" and "steam off" functionality. The innovative design allows the valve to be returned to the steam position enabling a second SIP cycle following media transfer.

Supplier: Caplugs

The HVC series Flex 500™ vinyl caps are temperature-resistant and protect up to 500 °F. They are extremely flexible and durable protective closures which are ideal for use as thread protectors, dust and moisture seals, and act as masking caps during painting, plating or powder coating operations.

Supplier: Chemglass

Universal vent port assembly is constructed of 316 L electro polished stainless steel. These port assemblies fit all types of spinner flasks, media bottles and vessels. Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes. Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.

Supplier: Optimize

Optimize is proud to introduce EXP2 - the next generation of EXP UHPLC fitting technology. Featuring a small ³/₁₆" hex-head EXP2 nut, the new EXP2 Driver and the original titanium hybrid ferrule, the EXP2 fittings offer hand-tight connections rated to 20000 psi+. The EXP2 nuts are available with 6-32, 6-40 and 10-32 threads and have been scaled down to allow for maximum working room in cramped spaces. The EXP2 Driver is a small, easy to use knurled torque driver which snaps on to the nuts for hand-tightening and loosening. The EXP2 Driver is slotted and can be removed from the nut and tubing after use.

Supplier: IBIDI USA MS

Connector for two µ-Slides with female Luers in a serial manner.

Supplier: Cytiva

Packaging connector XK 16 or XK 26 is used to connect another column, used as a packing reservoir, to a XK 16 or XK 26 column to achieve efficient packing.

Supplier: Peeke Scientific

Reusable vaplock filter connector 90° for polypropylene/EPDM justrite quick disconnect.

Supplier: ANALYTICAL SALES & SERVICE MS

Fits GL45 thread safety caps, GL38 bottle and Canary-Safe™ caps.

Supplier: IDEAL VACUUM PRODUCTS MS

These adapter rubber hose nozzles are KF-25 to rubber hose and fit a 12 mm ID rubber hose.

Supplier: Peeke Scientific

PP, Tubing int.Ø: ⅛"

Supplier: THERMO ELECTRON NORTH AMERICA MS

Liquid junction cross connects LC transfer line and column.

Supplier: Cytiva

These connectors allow for connection from a 25 mm TriClamp (TC) connector to various threaded connectors.

Supplier: Cytiva

Packing Tricorn columns is simplified using Tricorn packing connector and the appropriate glass tube.