You searched for: Samplers

Supplier: Chemglass

Micro impinger designed for sampling of small volumes of air at low jet velocity, as per EPA Method 6

Supplier: DWK Life Sciences (KIMBLE)

The Coliwasa tube is used to obtain a vertical column of liquid representing an accurate cross-section of the sampled material

Supplier: Restek

Compatible with Resprep® 1 ml, 3 ml, 6 ml, and 15 ml SPE cartridges and the Diskcover-47 extraction disk holder.

Supplier: Science First

This is the grab to choose for soft, finely divided littoral bottoms that are free from vegetation, such as sticks and decayed leaves (or with short, erect vegetation only). Also suitable for intermixtures of sand, stones, and other coarse debris.

Supplier: LaMotte

Designed for Sand or Silt

Supplier: Antyila Scientific

Reliably sample various powders, granules, and grains.

Supplier: DWK Life Sciences (KIMBLE)

Determines Settleable Matter in Water

Supplier: SAMPLING SYSTEMS LTD

Sample ejection rods are designed to facilitate the removal of samples.

Supplier: Koehler

Sampling tubes are suitable for taking bottom or other-level samples from barrels and drums.

Supplier: United Scientific Supplies

See the clarity or turbidity of a water source.

Supplier: SAMPLING SYSTEMS LTD

Ice borer specifically designed for ice, wax, and other similar materials.

Supplier: STAT PEEL INC

Air sampling badge for active respirable or inhalable particle collection according to ISO 7708.

Supplier: STAT PEEL INC

The nanoporous filtration membrane inside the Stat Peel filtration slide allows the collection of aerosol particles down to the nanometer range.

Supplier: Walter Stern

Two green latex rubber bulbs, each with approximately 200mL capacity

Supplier: Restek

Unwashed PUF plugs for both low-volume and high-volume sampling.

Supplier: Electron Microscopy Sciences

The BioCulture Calibration Head is A NIST traceable venture calibrator with 1% accuracy that allow users to calibrate the flow of the BioCulture pump themselves without having to send the pump out for service of calibration.

Supplier: Electron Microscopy Sciences

EMS-Core is an all-new revolutionary multi-purpose sampling tool, designed with retractable cutting cannula for easy operation.

Supplier: Chemglass

Pipe will fit a 2 to 5 liter reactor and has a lower diameter of ¹/₂" and a length of 212 mm into the reactor. The serrated hose connection is also ¹/₂" (12.7 mm) OØ. Can also be used as a quick way to harvest material due to its size.

Supplier: EFD INC.- CUSTOMER SERVICE TE

This is used to collect adhesive

Supplier: LaMotte

Easily Collect Benthic Macroinvertebrates

Supplier: STAT PEEL INC

The sampling kit allows for the collection of respirable particles for inspection in the STAT PEEL® Identifier system.

Supplier: LaMotte

This 8", black and white disk is used to determine the turbidity of natural water.

Supplier: STAT PEEL INC

Sampling kits allow for the collection of respirable, inhalable, or both respirable and inhalable particles for inspection in the STAT PEEL® Identifier System.

Supplier: Spectrum Laboratories

Designed for quick and easy, one-hand transfer of agar plugs and the harvesting of microbial colonies

Supplier: Restek

These cartridges used for collection of semivolatiles (pesticides, PCBs, PAHs).

Supplier: Restek

Restek’s humidification chamber is made of acrylic and withstands pressure up to 90 psi.

Supplier: Restek

Restek’s passive air sampling kit incorporates all the hardware necessary to collect air samples and is easy to assemble for field sampling.

Supplier: Peco Sales

Great for Stream Sampling

Supplier: SAMPLING SYSTEMS LTD

Removable tips can add additional effectiveness to powder sampling.

Supplier: SAMPLING SYSTEMS LTD

The spiral sampling spear is ideal for taking samples of powders, grains and granules at multiple locations.