You searched for: Condensers

Supplier: Ace Glass

A 50mm size for samples of approximately 25mL

Supplier: Kemtech America

For vertical style of Heifdorfe.

Supplier: Kemtech America

Tightly-wrapped coil provides maximum cooling

Supplier: Kemtech America

Side joint is at a 90° angle.

Supplier: Kemtech America

With joints at top and bottom.

Supplier: Kemtech America

With narrow annular space for high cooling efficiency.

Supplier: Kemtech America

Coil O.D.

Supplier: Corning

This borosilicate condenser is designed with a heavy walled outer jacket to provide long life. The lighter walled inner tube provides efficient heat transfer. To reduce breakage, tabulations are located on the same side.

Supplier: Kemtech America

With joints at the top and bottom.

Supplier: Ace Glass

Complete, one-piece, jacketed round bottom flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis

Supplier: Kemtech America

Indentations at the bottom for supporting packing material

Supplier: Foxx Life Sciences

Borosil® Graham Condensers are a coiled distillate option that have an interchangeable inner and outer joint with a drip tip.

Supplier: Kemtech America

Friedrichs condenser with upper hose connectios and lower ground glass joint.

Supplier: Ace Glass

Rugged heavy wall jacketed one-piece pressure reactor with bottom outlet valve, for use at pressure of up to 45 PSIG @ 100°C

Supplier: Kemtech America

The top joint is an outer [ST] joint at a 15° angle.

Supplier: Ace Glass

Rugged heavy wall jacketed one-piece pressure reactor, for use at pressure of up to 45 PSIG @ 100°C

Supplier: Ace Glass

Turn-key reactor system featuring a one-piece, unjacketed, pressure vessel with a combination Ace-thred valve and 28/15 o-ring ball joint bottom outlet

Supplier: Ace Glass

Improved sublimer for deep vacuum operation, features a Viton o-ring, and a stainless steel quick-release clamp.

Supplier: Ace Glass

Rugged one-piece heavy wall unjacketed pressure reactor with Bottom Outlet Valve, for use at pressure of up to 45 psig @ 100°C

Supplier: Foxx Life Sciences

Made of Borosilicate glass 3.3 to withstand heat and temperature changes.

Supplier: Kemtech America

Extended offset lower tip for drop control.

Supplier: Kemtech America

With 12 mm (int.Ø) indentations to support packing material.

Supplier: Kemtech America

Indentations at the bottom for supporting packing material.

Supplier: Kemtech America

With a joint at a 15° angle.

Supplier: Kemtech America

A grease-free sublimer with a flat bottom to enable heating on a hot plate stirrer.

Supplier: Kemtech America

A sublimator with a 2mm glass stopcock and a 25mL long-neck flask for small volume efficiency.

Supplier: Kemtech America

A grease-free, two-piece sublimation apparatus consisting of an upper water cooled condenser and a lower vessel to hold the material to be sublimed.

Supplier: Chemglass

Two-piece grease-free sublimer with a flat bottom to enable heating on a hot plate stirrer

Supplier: Chemglass

Joint size: 14/10-14/20. The development of MINUM-WARE microscale glassware has made possible the reduction in solvent and reagent costs required for basic organic chemistry experiments.