Chemical Fume Hoods
Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.
REDISHIP Supreme Air® Fume Hood Worktops, Kewaunee®
These modified epoxy resin worktops are available with or without a 5.1cm (2") diameter vent hole
Expand 8 Items
Basic™ 47 and Basic 70 Laboratory Hoods, Labconco®
The Basic™ hood is ideal for rooms with ceilings below 2.4 m, 8" and for shallow countertops.
Expand 4 Items
Solid Epoxy Flat Work Surfaces, Labconco®
Combine with a base stand or cabinet to support Fiberglass 30 and Basic™ Labconco® laboratory hoods.
Expand 2 Items
Adjustable Height Base Stands, Labconco®
For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC Perchloric Acid, Protector Stainless Steel Perchloric Acid, Logic+, Logic, Cell Logic, PuriCare Procedure Stations and Protector Radioisotope laboratory hoods
Expand 2 Items
Protector® Demonstration Hoods, Labconco®
Designed for classroom use, these lightweight hoods feature an epoxy-coated aluminum frame with tempered safety glass front sash, sides, rear baffle, and top.
Expand 4 Items
Basic 47 and 70 Fume Hoods
Ideal for rooms with shallow countertops or ceilings below 8', these hoods are constructed of sturdy, epoxy-coated steel both inside and out.
Furnished with a 3/16" tempered safety glass counterbalanced sash and duct collar, the hoods ensure your students’ safety. A removable front panel and air foil, vapor-proof interior light, and two-piece adjustable baffle make for easy access and convenient use.
The right side fixture is factory prepared to accept up to three service fixtures, one duplex electrical receptacle, and air monitor. The side wall is factory prepared for a wall-mounted cupsink with turret. Hoods are available in two model types – Basic 47 Hoods with a 4' nominal width are designed as an individual lab station,
Basic 70 Hoods are 6' in width and spacious enough to accomodate numerous samples or workstations.
Both models are available with or without a blower. Blowers may be mounted in or above the hood, or on the roof. Basic 47 hoods that include a blower have a 3/4 hp motor.
Note: Worksurface, base cabinet, and blower are required for operation, and sold separately.
For assistance, contact your local sales representative
Expand 4 Items
Venturi V05-General Purpose Bench Fume Hood with Vertical Rising Sash, Kemglass Liner, Kewaunee Scientific
The Supreme Air Venturi provides the safest user-friendly fume hood manufactured today. The Supreme Air Venturi utilizes proven containment enhancing techniques coupled with innovative laboratory convenience features, including: adjustable LED lights, electromechanical sash stops, ultra-smooth sash system, and push button sash management.
Expand 1 Items
Clean Aire II Ductless Fume Hoods
This self-contained hood unit comes equipped with an integral exhaust blower and carbon filter, which do not require duct or venting to the outside. Small quantities of solvents, acids, and odors are quickly absorbed in an activated carbon filter which recirculates air back into the room, thus avoiding installation and energy cost. Hood is ideal for laboratories that require multiple locations or where space is limited. Equipped with 115V exhaust blower, vapor proof light switch, and power cord, unit is fully assembled. Filters, worksurface, and base stands are available separately.