You searched for: Standards

Supplier: Restek

Mixture is packaged in purge and trap methanol at a concentration of 200 µg/mL in a 1 ml ampoule.

Supplier: Restek

Haloethers calibration mix contains bis(2-chloroethoxy)methane, bis(2-chloroethyl)ether, 4-bromophenyl phenyl ether, 4-chlorophenyl phenyl ether, 2,2'-oxybis(1-chloropropane).

Supplier: Restek

Mix contains: Benzene (71-43-2); Ethylbenzene (100-41-4); Methyl tert-butyl ether (MTBE) (1634-04-4); Toluene (108-88-3); m-Xylene (108-38-3); o-Xylene (95-47-6); p-Xylene (106-42-3).

Supplier: SPEX CERTIPREP LLC

Mixture is packaged in methanol at a concentration of 1000µg/mL in a 1.5mL ampule.

Supplier: Restek

Contains: Bromomethane (methyl bromide) (74-83-9); Chloroethane (ethyl chloride) (75-00-3); Chloromethane (methyl chloride) (74-87-3); Dichlorodifluoromethane (CFC-12) (75-71-8); Trichlorofluoromethane (CFC-11) (75-69-4); Vinyl chloride (75-01-4)

Supplier: SPEX CERTIPREP LLC

Semivolatiles

US EPA Method 625 is an analytical method for the monitoring of acid and base neutral extractable fractions in municipal and industrial wastewater by GC/MS.

US EPA Method 8270 is a general analytical method for the monitoring of semivolatiles in environmental and waste samples by GC/MS.

Supplier: SPEX CERTIPREP LLC

Semivolatiles

US EPA Method 625 is an analytical method for the monitoring of acid and base neutral extractable fractions in municipal and industrial wastewater by GC/MS.

US EPA Method 8270 is a general analytical method for the monitoring of semivolatiles in environmental and waste samples by GC/MS.

Supplier: SPEX CERTIPREP LLC

CLP Standards for ICP & ICP-MS
Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2.

The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability.

US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections:

• Exhibit C, Inorganic Target Analyte List (TAL)
• Exhibit D, Analytical Methods
• Exhibit E, QA/QC Requirements

CLP ISM 01.2 and ILM 05.2 & 05.3 Standards for ICP-MS
For verification of inter-element and background correction factors at the beginning and the end of each analysis run. In addition, a verification must be done after every 20th sample. Two solutions are required for the most common interference check: Solution A, the interferents alone (CL-INT-A2) and Solution AB, a combination of interferents (CL-INT-A2) and analytes (CL-INT-B3 or CL-INT-B4). Solution A is prepared by diluting CL-INT-A2 10-fold. Solution AB is prepared by diluting CL-INT-A2 10-fold and CL-INT-B3 or CL- INT-B4 100-fold; for example, 10 ml of CL-INT-A2 and 1 ml of CL-INT-B3 or CL-INT-B4 into a 100 ml volumetric flask, brought to volume with a matrix blank. Once prepared, the solutions should be analyzed consecutively, starting with Solution A.

Supplier: Restek

This contains: n-butyl acetate; ethyl acetate; isopropyl acetate; n-propyl acetate; vinyl acetate.

Supplier: LaMotte

Tests for Nine Essential Minor Elements

Supplier: SPEX CERTIPREP LLC

Ensure state and accreditation regulation compliance with proficiency testing.

Supplier: Ultra Scientific

Mixture is packaged in methyl alcohol in 1 mL ampules.

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.

Supplier: Restek

For the infrared spectrophotometric method for the determination of Total Recoverable Petroleum Hydrocarbons.

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.

Supplier: Restek

Mix contains: Allyl alcohol (2-propen-1-ol) (107-18-6); 2-Chloroethanol (107-07-3); Ethanol (64-17-5); Isobutyl alcohol (78-83-1); Propargyl alcohol (107-19-7).

Supplier: Restek

Mix contains: Acrylonitrile (107-13-1); Ethyl methacrylate (97-63-2); Malononitrile (109-77-3); Methacrylonitrile (126-98-7); Methyl methacrylate (80-62-6); Propionitrile (107-12-0); Styrene (100-42-5).

Supplier: USP

(11,000 USP Endotoxin Units) (COLD SHIPMENT REQUIRED)

Supplier: USP

(30 mg/ampule; 5 ampules) (Vitamin D2)

Supplier: SPEX CERTIPREP LLC

CLP Series Methods: The US EPA retains analytical services through the Contract Laboratory Program (CLP). The CLP follows detailed SOPs derived from EPA methods and SW-846. The CLP Volatile Organic Analysis Method is an analytical method for the analysis of aqueous or solid samples for VOCs by GC/MS.

Supplier: Restek

Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, Restek offer a product that contains these compounds for retention time determination.

Supplier: SPEX CERTIPREP LLC

Volatiles, CLP Series Methods: The US EPA retains analytical services through the Contract Laboratory Program (CLP). The CLP follows detailed SOPs derived from EPA methods and SW-846. The CLP Volatile Organic Analysis Method is an analytical method for the analysis of aqueous or solid samples for VOCs by GC/MS.

Supplier: Hach

Standard solution for accuracy checks in sulfate determinations.

Supplier: Restek

Mixture is packaged in methanol at a concentration of 200 µg/mL in a 1 mL ampoule.

Supplier: Restek

2,4'-DDT, Restek

Supplier: Restek

2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.