You searched for: Distillation Adapters

Supplier: Chemglass

These adapters for distillation systems are designed with standard taper outer joint at the top and inner joints on the bottom and sidearm.

Supplier: Kemtech America

Use distillation connecting adapter as a component in atmospheric or vacuum distallations.

Supplier: Kemtech America

Distillation connecting adapter accommodates a 76 mm immersion thermometer.

Supplier: DWK Life Sciences (KIMBLE)

Used in distillation assemblies where adjustable immersion depth of the thermometer is desired.

Supplier: Chemglass

Compact and simple distilling adapter for use with process reactors. Vapor flows upward freely and distillate is collected in to the small bowl below the joint and through the stopcock into a distilling receiver.

Supplier: Kemtech America

Synthware 105° bent distillation adapter.

Supplier: Chemglass

Adapters feature a thermometer neck on the vertical side tube for immersion thermometers

Supplier: Chemglass

High quality distillation Adapters are for use with flasks or reaction vessels.

Supplier: Kemtech America

Distilling trap adapter is placed above flask to prevent carryover of reactions that have a tendency to foam.

Supplier: Chemglass

Distillation adapter with a top outer standard taper joint.

Supplier: Chemglass

Distillation adapters with top outer and lower inner joints, both the same size.

Supplier: Kemtech America

This vacuum distillation adapter is useful in the sub-boiling separation of mixtures with volatile components.

Supplier: Corning

This distillation adapter tube with sidearm has an outer joint at the top and an inner-sealed through drip tip joint at the bottom.

Supplier: Chemglass

Adapters feature standard taper inner joints at a 75° angle to one another.

Supplier: Chemglass

Distillation adapters with sealed-in lower drip tip and top outer joints, both of same size.

Supplier: Chemglass

With two standard taper inner joints, parallel, and at a 75° angle to the connecting tube.

Supplier: Chemglass

Adapters have a #7 Chem-Thread at the top for a vacuum-tight seal of plain stem thermometers.

Supplier: Ace Glass

The Reflux/Distillation Splitter is used to allow easy switching of the distilate path by means of adjusting the valve position to either open or closed.

Supplier: Chemglass

Adapters have a standard taper outer joint at the top of the main tube for use with jointed thermometers.

Supplier: Glassco

Claisen adapters provide dual entry into a variety of flasks.

Supplier: Corning

PYREX®, borosilicate glass.

Supplier: Chemglass

With two standard taper inner joints, parallel, at a 75° angle to the connecting tube.

Supplier: Corning

PYREX®, borosilicate glass.

Supplier: Corning

PYREX®, borosilicate glass.

Supplier: Kemtech America

Synthware distillation adapter with 75° angle.

Supplier: Chemglass

Adapters have a tubulation at the top for use with rubber fitting.

Supplier: Kemtech America

Adapter accommodates thermometer in threaded port.

Supplier: Chemglass

Adapter is placed above flask to prevent carry-over of reactions which have a tendency to foam.

Supplier: Chemglass

Adapter is designed for use with flasks or reaction vessel lids with a 10 or 20° angled side neck.

Supplier: Chemglass

Compact and simple distilling/splitter adapter for use with process reactors lids that have a 10° angled side neck.