You searched for: Distillation Components

Supplier: Corning

These PYREX® 60° angle distilling connecting adapters have a 24/40 Standard Taper outer joint at the upper end and inner 24/40 Standard Taper joints and on the sidearm and lower joints

Supplier: DWK Life Sciences (KIMBLE)

Provide dual entry into a variety of flasks.

Supplier: DWK Life Sciences (KIMBLE)

Rotation of cold finger condenser allows collection of distillate or return to flask.

Supplier: DWK Life Sciences (KIMBLE)

These distillation receivers are ideally suited for the determination of water content in organic solvents.

Supplier: Ace Glass

This adapter features a 75° side arm.

Supplier: Ace Glass

Distilling trap adapters are placed above flask to prevent carryover of reactions that have a tendency to foam.

Supplier: Ace Glass

This adapter is designed for connecting a distilling column with a vertical condenser.

Supplier: Ace Glass

This apparatus is useful for separating higher boiling liquids that require a short flask-to-column distance to prevent excessive condensation

Supplier: Ace Glass

Microscale Hickman still head is used to carry out micro-sample fractional distillations

Supplier: Ace Glass

Full-size standard taper 24/40 jointed, low-holdup, short-path still is available unjacketed or jacketed with indents

Supplier: Ace Glass

This Hempel distillation column has a [ST] 24/40 reinforced outer joint at top, a [ST] 24/40 inner joint at bottom, and a perforated glass disc for packing support

Supplier: Ace Glass

This Hennion Design distillation head is used for variable reflux ratio, and can be operated under vacuum

Supplier: Ace Glass

This is an excellent all-purpose receiver for general distillation work

Supplier: Ace Glass

Graduated to 125mL in 1mL subdivisions

Supplier: Ace Glass

This apparatus is used for a limit test for arsenic, as described in European Pharmacopeia, 1997, page 51

Supplier: DWK Life Sciences (KIMBLE)

This apparatus is designed for use in the analysis of industrial waste waters, saline, and reagent grade water

Supplier: SP Industries

Used for the determination of sulfites in food and related product, this Monier-Williams Sulfites distilling apparatus is made of borosilicate glass and has Standard Taper 24/40 outer and inner joints

Supplier: DWK Life Sciences (KIMBLE)

This apparatus is used for determining the proteinaceous nitrogen content in water.

Supplier: DWK Life Sciences (KIMBLE)

Design uses Vigreux indentations for increased surface area within the vapor path. This promotes better refluxing prior to condensation, yielding a better separation.

Supplier: Corning

These angled two-way adapters are made of PYREX® borosilicate glass.

Supplier: DWK Life Sciences (KIMBLE)

75° Connecting distillation adapter with BEVEL-SEAL™ used in distillation assemblies where adjustable immersion depth of the thermometer is desired.

Supplier: DWK Life Sciences (KIMBLE)

Bidwell-Sterling designed for the determination of moisture in foods and organics.

Supplier: SP Industries

These borosilicate glass distilling heads have an interchangeable Standard Taper inner joint at the bottom for connection to a distilling column and a full length Standard Taper 10/30 outer member to receive a thermometer calibrated for 75mm immersion.

Supplier: Corning

Distilling apparatus to determine nitrogen levels in organic compounds.

Supplier: Corning

PYREX®, borosilicate glass.

Supplier: DWK Life Sciences (KIMBLE)

KONTES® 75° bent distillation adapter.

Supplier: SP Industries

These distilling columns come with indentations for random packing support, and water jacket that allows for alternative use as a condenser.

Supplier: DWK Life Sciences (KIMBLE)

The Hickman distillation head is designed for short path atmospheric or vacuum distillations with quantities ranging from a fraction of a milliliter to three milliliters.

Supplier: Kemtech America

Kjeldahl trap adapters feature two [ST] 24/40 joints.

Supplier: Ace Glass

This is a large, reflux splitter installed between the boil-up pot or column and the condenser