You searched for: Distillation Components

Supplier: Ace Glass

This cyanide distillation apparatus is used in testing for soluble and insoluble cyanides in water

Supplier: Ace Glass

This distillation apparatus is used for methoxy determination as described in U.S

Supplier: Ace Glass

This is a versatile unit that can be used as a solvent recovery still for azeotropic separations of solvents, either heavier or lighter than water

Supplier: Kemtech America

Rotating distillation receiver allows four fractions to be collected.

Supplier: Ace Glass

The column length in millimeters (listed below) refers to the effective length of the column as measured from the lowest to the highest indent of the column

Supplier: Ace Glass

Modified Bidwell & Sterling type with overflow to allow excess solvent to return to boiling flask

Supplier: Ace Glass

Adapter's top joint is a combination cap, thread and joint to accommodate and seal other microscale apparatus.

Supplier: Ace Glass

This column has a reinforced outer [ST] joint at top and a ground inner [ST] joint at bottom

Supplier: Ace Glass

Especially useful when heavier-than-water solvents are employed

Supplier: Ace Glass

This distillation receiver is for use where separate fractions are desired without disturbing the distillation pressure

Supplier: Ace Glass

This Vigreux distillation column has a male drip tip on the joint of the Claisen side arm, and a [ST] 10/30 joint for a 25mm immersion thermometer

Supplier: Ace Glass

This distillation receiver is for use where separate fractions are desired without disturbing the distillation pressure

Supplier: DWK Life Sciences (KIMBLE)

For the determination of free sulfite and a reproducible portion of the bound sulfites in food, such as the carbonyl addition products.

Supplier: Ace Glass

Arsenic Limit Test apparatus as described in the European Pharmacopeia chapter 2.4.3.

Supplier: Ace Glass

Distilling head sits on top of your vapor path column. Has condenser side arm with drip tip.

Supplier: Corning

This Hickman Still Head is a replacement part for the 6949M series of PYREX® microchemistry kits.

Supplier: SP Industries

These distilling receivers are provided with an additional solvent return line which avoids recycling condensate to the flask.

Supplier: Ace Glass

Short-Path distillation head with integral vigreux vapor path column.

Supplier: Ace Glass

This adapter is available with glass or 1:5 solid PTFE stopcock plug on lower side arm.

Supplier: Ace Glass

This floating ball type Snyder distillation column has a reinforced [ST] 24/40 outer joint at top and [ST] 24/40 inner joint at bottom

Supplier: Ace Glass

The top joint of this adapter is a combination cap, thread and a standard taper joint to accommodate and seal other microscale apparatus.

Supplier: Corning

Receivers, made of PYREX® brosilicate glass, are designed for determining water by distillation.

Supplier: Corning

PYREX® borosilicate glass.

Supplier: SP Industries

These distilling heads feature a removable cold finger condenser with a Standard Taper 29/42 inner joint.

Supplier: DWK Life Sciences (KIMBLE)

Bent 105° distillation adapters.

Supplier: SP Industries

Distilling apparatus includes a three-way bent adapter for a Standard Taper 10/18 thermometer with a 25 mm immersion, a 110 mm Liebig condenser, a 105° vacuum adapter (ML-390-700), a 25 mL Erlenmeyer flask (ML-1230-706), and a pear-shaped 50 mL distilling flask (ML-1160-718).

Supplier: Ace Glass

This distillation head has a condenser jacket on the side arm

Supplier: Ace Glass

The Reflux/Distillation Splitter is used to allow easy switching of the distilate path by means of adjusting the valve position to either open or closed.

Supplier: Ace Glass

This vacuum jacketed distillation column is silvered with an observation stripe

Supplier: Ace Glass

This distillation head has a cold finger type condenser and 0-3mm PTFE stopcock for reflux control