You searched for: Distillation Components

Supplier: Ace Glass

Receiver is graduated in 1mL subdivisions

Supplier: SP Industries

This borosilicate glass three-way adapter has a Standard Taper 10/30 outer joint on top to accommodate a thermometer, bottom inner Standard Taper 24/40 joint, and 75° angle inner side joint of same size.

Supplier: Kemtech America

Synthware 105° bent distillation adapter.

Supplier: Corning

PYREX®, borosilicate glass.

Supplier: Corning

Two-way 105° angle vacuum suction tube receiving adapters with standard taper joints made of PYREX® borosilicate glass.

Supplier: Kemtech America

Claisen joint adapter for microscale applications

Supplier: Corning

PYREX®, borosilicate glass.

Supplier: Corning

PYREX®, borosilicate glass.

Supplier: Ace Glass

This distillation apparatus is used for methoxy determination as described in U.S

Supplier: Ace Glass

This is a versatile unit that can be used as a solvent recovery still for azeotropic separations of solvents, either heavier or lighter than water

Supplier: Ace Glass

This distillation head has a cold finger type condenser and 0-3mm PTFE stopcock plug with PTFE ring seals for reflux control

Supplier: Ace Glass

This apparatus comes has a [ST] 10/30 joint for a 25 mm immersion thermometer

Supplier: Ace Glass

This distillation apparatus is used for converting simple and the most complex cyanides into HCN, and for isolating cyanide from most interferences before measuring by titration or colorimetric analysis in the examination of industrial wastes and other water

Supplier: Ace Glass

This cyanide distillation apparatus is used in testing for soluble and insoluble cyanides in water

Supplier: Corning

PYREX® borosilicate glass.

Supplier: Corning

Receivers, made of PYREX® brosilicate glass, are designed for determining water by distillation.

Supplier: DWK Life Sciences (KIMBLE)

Bent 105° distillation adapters.

Supplier: Ace Glass

Short-Path distillation head with integral vigreux vapor path column.

Supplier: SP Industries

Distilling apparatus includes a three-way bent adapter for a Standard Taper 10/18 thermometer with a 25 mm immersion, a 110 mm Liebig condenser, a 105° vacuum adapter (ML-390-700), a 25 mL Erlenmeyer flask (ML-1230-706), and a pear-shaped 50 mL distilling flask (ML-1160-718).

Supplier: Ace Glass

This distillation head has a condenser jacket on the side arm

Supplier: Ace Glass

The Reflux/Distillation Splitter is used to allow easy switching of the distilate path by means of adjusting the valve position to either open or closed.

Supplier: Ace Glass

This vacuum jacketed distillation column is silvered with an observation stripe

Supplier: Ace Glass

This distillation head has a cold finger type condenser and 0-3mm PTFE stopcock for reflux control

Supplier: Ace Glass

This moisture trap is used for solvents heavier than water

Supplier: Ace Glass

Used for the removal of solvents or other volatiles by vacuum distillation at ambient temperature

Supplier: Ace Glass

This adapter is available with glass or 1:5 solid PTFE stopcock plug on lower side arm.

Supplier: Ace Glass

This modified Claisen stye adapter comes with an additional arm with reinforced standard taper outer joint.

Supplier: Ace Glass

This floating ball type Snyder distillation column has a reinforced [ST] 24/40 outer joint at top and [ST] 24/40 inner joint at bottom

Supplier: Ace Glass

This adapter is designed for connecting distilling columns with a vertical condenser.

Supplier: Ace Glass

This distillation head features automatic reflux control via a solenoid valve arrangement