You searched for: Inoculating Loops and Needles

Supplier: Electron Microscopy Sciences

Made from 26 gauge B and S platinum wire with 15% iridium to provide rigidity with thinner wire for delicate work. Both ends are ground smooth.

Supplier: Electron Microscopy Sciences

Custom tip designed from tungsten. Tip radius is < 0.5 µm with 6° taper angle for maximum lifetime service. Compatible with Short-Cut™ system for direct conversion to TEM grid.

Supplier: Electron Microscopy Sciences

The Perfect loop is used to place your thin sections that have been cut on the ultramicrotome, easily on the grid mesh without creases.

Supplier: CELLTREAT Scientific Products

Loops, needles, and spreaders are flexible for easy access to small volume tubes and dishes.

Supplier: WORLD PRECISION INSTRUMENTS LLC

For soft tissue retraction. Loop prongs. Knurled thumb screw.

Supplier: Decon Labs

LeLoop®, Decon’s inoculating loops, are made of high-quality, twisted nichrome wire which is designed to cool rapidly after flaming.

Supplier: Electron Microscopy Sciences

The 0.01 mL loops are calibrated to A.P.H.A. Standards and are made from 19 gauge B and S platinum wire with 5% rhodium. The 0.001 mL loops is made from 26 gauge B and S platinum with 15% iridium.

Supplier: Electron Microscopy Sciences

Set consists of one lightweight precision handle and four interchangeable tools. Can be used for manipulating micro samples, scribing, spring assembly, and probing. The handle is finely balanced, non-rolling gold anodized with split collet and a knurled lock nut. The length is 120 mm (4.7"). Precision forged and ground tools are hardened and nickel plated tool steel with sharp tips.

Supplier: Globe Scientific

These 1uL disposable inoculation loops offer a convenient and safe way of streaking culture media

Supplier: Electron Microscopy Sciences

Made from Polystyrene.

Supplier: Electron Microscopy Sciences

Custom probe tip with a nickel tube shank and tungsten tip for use with Omniprobe systems. Tip radius is 0.5 µm with 13° taper angle for maximum lifetime service.

Supplier: Electron Microscopy Sciences

Custom tip designed from tungsten. Tip radius is < 0.5 µm with 6° taper angle for maximum lifetime service. Compatible with Short-Cut™ system for direct conversion to TEM grid

Supplier: Electron Microscopy Sciences

Type 2 Curved End Effector is designed for low attack angle manipulation and lift-out. The shank is curved to permit low angle approach and solid attachment beneath the sample plane without collision with the surrounding matrix. The Straight End Effector for Xtreme Access probe shaft.

Supplier: Phenix Research Products

High impact polystyrene loops and needles are smooth and flexible to facilitate uniform and smooth streaking without damaging the gel surface. Needles are straight and suitable for removal of specimens of single colonies. Packed sterile in safe, tamper proof, zip-seal resealable bags.

Supplier: Hach

PS, sterile, disposable inoculating loop. Used for testing recreational water, wastewater and drinking water.