You searched for: Manifolds

Supplier: Chemglass

Single bank vacuum manifold with 0 to 8 mm Chem-Vac™, Chem-Cap® valves mounted on a 45° angle to the user, permitting easy operation inside of a fume hood.

Supplier: Honeywell Research Chemicals

The exit port of the SPE columns is a Luer tip that allows the columns to be affixed securely to the vacuum manifold.

Supplier: AGILENT TECHNOLOGIES, INC (CSD)

Vac Elut 24 SPS manifold processes up to 24 SPE cartridges at the same time.

Supplier: Justrite

Manifolds enable up to six waste lines (per manifold) from HPLC processes to be fed into a single intake fitting.

Supplier: DWK Life Sciences (KIMBLE)

Double vacuum gas manifold is for connecting inert gas and vacuum sources.

Supplier: Chemglass

Four port manifold with 2 mm bore glass stopcocks on the ports.

Supplier: DWK Life Sciences (KIMBLE)

These manifolds are used to connect inert gas and vacuum sources to sidearm stopcocks (three-place, four-place or five-place manifolds). Which is manufactured from 33 expansion, low extractable borosilicate glass.

Supplier: Chemglass

Double-bank manifold for use with vacuum and inert gas

Supplier: Chemglass

Double bank, three-port manifold with 0 to 8 mm Chem-Vac™, Chem-Cap® valves for use on the (80060-052) portable cart.

Supplier: Ace Glass

The no.15 o-ring joint connections at each end

Supplier: 3M Healthcare

3M™ High Flow Series Triple Manifold Assembly (3XX) includes a single inlet port for incoming water and a single outlet port for filtered water. This product features ¾" MNPT inlet and outlet water connections.

Supplier: Ace Glass

The no.15 o-ring joint connections at each end

Supplier: Chemglass

General purpose, double-bank manifold for use with vacuum and inert gas.

Supplier: DWK Life Sciences (KIMBLE)

NMR sealing manifold provides an easy way to evacuate and tip-off NMR tubes without additional sealing to other glass apparatus.

Supplier: 3M Healthcare

3M™ High Flow Series Dual Port Triple Manifold Assembly (DP3XX) provides three heads for 3M™ High Flow Series water filtration cartridges.

Supplier: Kemtech America

Vacuum manifolds are available with a serrated hose connection (10 mm ext. Ø) on the right, left, or both right and left hand sides.

Supplier: 3M Healthcare

3M™ High Flow Series Twin Manifold Assembly (2XX) includes a single inlet port for incoming water and a single outlet port for filtered water.

Supplier: Ace Glass

With a spherical 35/20 ball joint connections at each end

Supplier: Ace Glass

The no.15 o-ring joint connections at each end

Supplier: Airgas

These two-station manifolds are designed to provide a safe, reliable method of wall-mounting a single cylinder regulator, eliminating the need to handle the regulator during cylinder change out.

Supplier: Phenomenex

Streamline 96-well plate processing for easier sample preparation with a pneumatic positive pressure manifold.

Supplier: DWK Life Sciences (KIMBLE)

The SPE glassware and manifolds have been specially designed for use with solid phase extraction disks to give you the highest possible recoveries of extracted analytes from drinking water, surface water and waste water samples.

Supplier: Kemtech America

Manifold features 4 mm double hollow high vacuum stopcocks

Supplier: Kemtech America

General purpose manifolds are available with either 2 mm or 4 mm PTFE stopcocks

Supplier: GVS FILTER TECHNOLOGY

Vacuum manifold used for portable water analysis, waste water analysis, dairy product analysis, beverages analysis.

Supplier: Ace Glass

Designed by Dr. Raymond Firestone, this rapid and efficient purge valve is designed to allow 100% replacement of air in reaction vessels with any desired gas. No mercury is used, no reducing valve is needed on the gas source, and no high-vacuum source is required. The valve also eliminates the need to watch manometers, hand-control gas flow, or install warning systems. Expensive gases are conserved as the flow can be cut to nearly zero when purging is complete. This economic valve makes it possible to run all reactions under nitrogen.

Supplier: 3M Healthcare

3M™ ScaleGard™ HP Pre-Filter Manifold Expansion Head, Model SGHP Pre-Exp increases the capacity of pre-filtration by allowing the addition of pre-filter cartridge.

Supplier: 3M Healthcare

3M™ High Flow Series Dual Port Twin Manifold Assembly (DP2XX) provides two heads for 3M™ High Flow Series water filtration cartridges.

Supplier: DWK Life Sciences (KIMBLE)

General purpose double bank manifold for use with vacuum and inert gas.

Supplier: 3M Healthcare

3M™ High Flow Series Dual Flow Twin Manifold Assembly (DF2XX) provide a vehicle for appropriate water quality to equipment requiring different water characteristics for cold beverages, ice and coffee. Manifolds are innovatively designed for ease of installation and maintenance. This model includes a pressure gauge to monitor differential water pressure.