You searched for: Electrodes

Supplier: Hach

sensION+ 5056 is a combination platinum ORP electrode with a glass body and non refillable gel-electrolyte reference. It is dedicated for use with Hach sensION+ labpratory pH (mV) meters.

Supplier: Hach

IntelliCAL™ ISENH4181 is a digital combination ammonium ion selective electrode (ISE) with a non refillable double junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.

Supplier: WTW

Adapter cable required.

Supplier: Hach

sensION+ 5055 is a combination platinum ORP electrode with a polycarbonate body and non refillable gel-electrolyte reference. It is dedicated for use with Hach sensION+ portable pH (mV) meters.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The ISO NOP007 has a tip diameter of just 7 µm and a length of 2 mm. The response is linear over a wide dynamic concentration range of NO.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The hydrogen peroxide sensors developed by WPI are designed to compliment existing high sensitivity fluorescent approaches with direct quantitative measurement in biological samples in the low nM range.

Supplier: YSI

Connect any ProDIGITAL integrated probe/cable assembly the ProSolo to form a complete sampling system. Probe assemblies are user-replaceable with cable lengths ranging from 1 to 100 meters.

Supplier: YSI

Connect any ProDIGITAL integrated probe/cable assembly the ProSolo to form a complete sampling system. Probe assemblies are user-replaceable with cable lengths ranging from 1 to 100 m.

Supplier: WTW

High quality, enhanced sensor technology combined with most modern measurement electronics.

Supplier: WORLD PRECISION INSTRUMENTS LLC

Direct quantitative measurements of hydrogen peroxide in biological samples.

Supplier: Hach

sensION+ 9652 is a half-cell (reference not integrated) chloride ion selective electrode with an epoxy body and non-replaceable crystalline membrane selective to chloride ions in solution.

Supplier: Hach

IntelliCAL™ ISEF121 is a digital combination fluoride ion selective electrode (ISE) with a non-refillable, single junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.

Supplier: Hach

IntelliCAL™ ISENA381 is a digital combination sodium ion selective electrode (ISE) with a refillable double junction reference and built-in temperature sensor. The probe is intended for laboratory use.

Supplier: Hach

IntelliCAL™ LDO101 is a digital, luminescent dissolved oxygen (LDO) electrode which is ideal for measuring dissolved oxygen in wastewater, drinking water and general water quality applications.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The ISO NOPNM is based on a novel design in which an electrochemically activated composite graphite nanofiber is used as the NO sensing element. The surface of the Nanosensor is then modified using a unique multi-layered NO selective membrane.

Supplier: Hach

The Radiometer GK2401C combination pH electrode has a glass body, Red-Rod reference system, refillable electrolyte (saturated KCl) and Radiometer Type 7 connector for compatibility with Radiometer MeterLab legacy meters.

Supplier: Hach

sensION+ 9655 is a half-cell (reference not integrated) fluoride ion selective electrode with an epoxy body and non-replaceable crystalline membrane selective to fluoride ions in solution.

Supplier: Hach

Digital combination ORP/Redox probes with built-in temperature sensor. Ideal for measuring absolute mV values in wastewater, drinking water and general applications.

Supplier: Hach

The LBOD101 is a digital, luminescent dissolved oxygen (LDO) sensor with a replaceable, integrated stirring system. The electrode measures the dissolved oxygen for BOD (Biochemical Oxygen Demand) determination in BOD bottles in BOD5 testing applications. Ideal for initial and final dissolved oxygen measurements.

Supplier: Hach

sensION+ 5059 is a combination multi-parameter electrode for determination of pH, conductivity and temperature. It has a plastic body, non-refillable gel reference electrolyte and built-in temperature sensor.

Supplier: Hach

sensION+ 5045 is a combination multi-parameter electrode for determination of pH, ORP and temperature. Dedicated for use with Hach sensION+ MM110 portable meters.

Supplier: Hach

Multisensor for pH, ORP, conductivity and temperature. For use with sensION+ MM150 multi-parameter meter.

Supplier: Cytiva

A biacore extend sensor chip for site-directed antibody capture. Suitable for study of a wide range of antibody fragments including Fabs and dAbs.

Supplier: Hach

Polarographic dissolved oxygen (DO) probe with built-in temperature sensor. For use with portable meters.

Supplier: Nova Biomedical

BioProfile® Flex 2 Microsensor cards are mainly used for automated chemistry analyzers. Chemistry and gas biosensors are combined in the credit card sized MicroSensor Card, which uses biosensor technology that has been validated in thousands of cell culture processes.

Supplier: Antyila Scientific

These Conductivity Cells can be used with Jenway Portable Conductivity Meter (model 470) and/or Jenway Bench Conductivity Meter (model 4510 and 4520).

Supplier: Antyila Scientific

EC200 conductivity cell for Oakton® 200 series meters and meter kits.

Supplier: Hach

This three-pole platinum cell with an integrated Pt1000 temperature sensor provides accurate, stable results over a wide measurement range.

Supplier: Hach

IntelliCAL™ CDC401 is a digital, graphite, 4-pole conductivity probe. The probe is available in either a standard or a rugged version.

Supplier: Hach

The 5062 is ideal for conductivity measurements in extreme conditions and for 'difficult' applications, including dirty and viscous samples. Dedicated for use with Hach sensION+ portable conductivity meters.