You searched for: Racks

Supplier: Bel-Art Products, a Part of SP

Designed specifically for 5 mL centrifuge tubes, including Eppendorf® brand, this rack will also accommodate other tubes with a diameter of 13–16 mm.

Supplier: Heathrow Scientific

This brightly colored, high density polyethylene foam rack is ideal for floating tubes in water baths, tubs or beakers.

Supplier: Heathrow Scientific

Adapt-A-Rack® are capable of holding different sized tubes in each available slot as the well literally adapts to hold the contents firmly in an upright position.

Supplier: Bel-Art Products, a Part of SP

Heavy-duty rack protects your expensive bottles keeping them from rolling, tipping and striking against one another.

Supplier: Bel-Art Products, a Part of SP

Round holes with tight tolerances hold 13 mm tubes firmly for accurate processing, thus reducing lost samples and potential damage to instruments. Increased efficiency is achieved by using the numbered locations for programming, resulting in higher throughput.

Supplier: Bel-Art Products, a Part of SP

Safely transport, incubate, and store up to 60 contact plates with lids up to 72 mm in diameter (RODAC®, Becton Dickinson) and streamline benchtop sample processing.

Supplier: Heathrow Scientific

These racks helps to keep large numbers of microtubes organized on benchtop.

Supplier: Thermo Fisher Scientific

Vertical racks for chest-type freezers.

Supplier: Thermo Fisher Scientific

Rack holds externally or internally threaded CryoTube® vials

Supplier: Bel-Art Products, a Part of SP

This “A” shaped rack has ten places for holding glass plates and a weighted base for safety.

Supplier: Bel-Art Products, a Part of SP

Unique tabs protect your samples from loss and contamination.

Supplier: Abcam

This Magnetic Separation Rack (ab286900) is used to capture and separate magnetic beads used in magnetic beads based purification techniques.

Supplier: Thermo Fisher Scientific

Nalgene® Stainless Steel Storage racks for Micro plates come in two convenient horizontal sizes to fit your freezer or refrigerator

Supplier: Jaece

Economical polyfoam floating racks for PCR microtubes

Supplier: Bel-Art Products, a Part of SP

Use as a drain stand for laboratory glassware and plasticware.

Supplier: Eppendorf

These transfer racks are designed as a work rack for sample preparation and used to maintain accurate and uniform temperatures.

Supplier: Bel-Art Products, a Part of SP

Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy.

Supplier: BURKLE INC

This flexible PVC system has stable drainage pegs, available in three lengths (60, 100 and 150 mm) with Ø 6, 10 and 12 mm, that can be repositioned at any time. The draining racks can be adapted to any apparatus which is to be dried.

Supplier: Bel-Art Products, a Part of SP

Chemical- and corrosion-resistant steel wire racks are coated with heat-cured epoxy.

Supplier: Bel-Art Products, a Part of SP

These polypropylene racks hold 25 cc, 75 cc (50 - 75 ml or 250 - 260 ml) or similar sized tissue culture flasks in a vertical position.

Supplier: Bel-Art Products, a Part of SP

This all-polypropylene rack provides efficient and extended cooling of twenty-eight 50 mL centrifuge tubes in a chilled bath.

Supplier: Heathrow Scientific

Durable tube racks are molded in a single, continuous piece so no assembly is required and there are no detachable pieces.

Supplier: Bel-Art Products, a Part of SP

Laboratory space is always in high demand making the small footprint of the Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing fragile, frequently used labware.

Supplier: Hardy Diagnostics

A sturdy, low profile, space-saving jar that can be used for anaerobic, microaerophilic, or CO₂ cultures.

Supplier: Thermo Scientific

Store tubes for automated picking/placing, liquid handling, and other high throughput applications using the Nunc® Universal Latch Rack for Cryogenic Tubes.

Supplier: Accurate Wirecraft

These racks are suitable for 20 mm test tubes

Supplier: Thermo Fisher Scientific

Designed to hold 1.5mL microcentrifuge tubes and 1.2 or 2.0mL cryogenic vials

Supplier: Bel-Art Products, a Part of SP

Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited.

Supplier: Bel-Art Products, a Part of SP

Chemical- and corrosion-resistant steel wire test tube racks are coated with heat-cured epoxy for long life and easy cleaning.

Supplier: Bel-Art Products, a Part of SP

Specifically designed for incubating 1.5 mL microcentrifuge tubes, this rack includes a hold-down disk to maintain a constant pressure on the tube caps and prevent them from opening during internal air expansion.