You searched for: Filters

Supplier: 3M Healthcare

3M™ High Flow Series Replacement Cartridge, Model HF30–S provides consistent quality water by reducing particulate, chlorine taste and odor, cyst**, and scale*. The Sanitary Quick Change (SQC) design allows for easy cartridge change–outs.

Supplier: 3M Healthcare

3M™ CUNO legacy in–line system for beverage applications, Model CFS717 provides consistent quality water by reducing particulate and chlorine taste and odor. Built–in scale inhibition can help to prevent the potentially harmful effects of scale build–up on equipment.

Supplier: 3M Healthcare

3M™ Water Filtration Products High Flow Series System for Steam Applications featuring "I.M.P.A.C.T." Technology & Scale Inhibition provides Recipe Quality Water™ that reduces sediment*, chlorine taste and odor and scale* for boiler based steamers, combi and proofer ovens.

Supplier: 3M Healthcare

3M™ High Flow Series System for Ice Applications, Model ICE265-S provides consistent quality water by reducing particulate*, chlorine taste and odor, and scale*. The Sanitary Quick Change (SQC) design allows for easy cartridge change-outs. This system is designed for use in ice applications.

Supplier: 3M Healthcare

3M™ Water Filtration Products Model CS-24 OCS Retrofit Replacement Cartridge provides consistent high quality water for beverages by reducing undesirable sediment*, chlorine taste and odor and cyst** from incoming water. Scale* inhibition helps to protect equipment from the potentially harmful effects of scale build-up. This cartridge is compatible with most OCS Everpure® foodservice heads.

Supplier: 3M Healthcare

3M™ High Flow Series Replacement Cartridge Kit, Model CARTPAK DP290 provides consistent high quality water by reducing particulate*, chlorine taste and odor, scale*, cyst**, and bacteria1. The Sanitary Quick Change (SQC) design allows for easy cartridge change–outs. Includes two (2) HF90 cartridges and one (1) HF8–S cartridge.

Supplier: 3M Healthcare

3M™ Replacement Cartridge for ScaleGard™ Espresso Applications, Model PS195 provides consistent quality water by softening incoming water and reducing chlorine taste and odor. The Sanitary Quick Change (SQC) design allows for fast and easy cartridge change-outs. Features ion exchange media that helps to reduce hardness and improve beverage quality for espresso applications.

Supplier: 3M Healthcare

3M™ ScaleGard™ blend series of cartridges for hardness and chloramines Reduction delivers custom water quality that you control. Simply blend in the desired level of minerals for Recipe Quality Water™. Cartridges reduce chlorine taste and odor – as well as chloramines that can react with metal, plastic and rubber materials; this reaction may potentially cause equipment damage.

Supplier: 3M Healthcare

3M™ Water Filtration Products Model CFS9720EL-S Retrofit 9000 Series Replacement Cartridge provides consistent quality water for beverages by reducing undesirable sediment*, chlorine taste and odor, and scale* from incoming water. The Sanitary Quick Change (SQC) design allows for easy cartridge change-outs. This extended length filter cartridge is compatible with most Everpure® foodservice heads.

Supplier: 3M Healthcare

3M™ Water Filtration Products Model CFS8812X (Original CUNO 8000 Series) Replacement Cartridge provides consistent high quality water for beverages by reducing undesirable sediment*, chlorine taste and odor, and cyst** from incoming water. With the Sanitary Quick Change (SQC) encapsulated cartridge design, this filter cartridge can be a great choice for your water filtration needs.

Supplier: Dikma Technologies

These syringe filters are designed for the economical, rapid filtration of almost any solution prior to analysis.

Supplier: Dikma Technologies

Particulates can damage expensive equipment, valves, columns, and pumps. They can also lead to erratic analytical results. Pre-filtering samples prior to analysis is critical in preventing column and frit blockage, undue wear on valve seals, and abnormally high operating pressures.

Supplier: STERLITECH MS

Polycarbonate Track Etch (PCTE) membranes are made from a thin, microporous polycarbonate film material.

Supplier: Advantec MFS

Cellulose Acetate (CA) membranes are a general purpose filter ideal for microbiological applications, filtration of enzyme solutions, diagnostic cytology, or receptor binding studies. CA membranes are low protein binding and have low aqueous extractables (0.1%wt). CA offers improved solvent resistance to low molecular weight alcohols, better heat resistance up to 180 °C and may be repeatedly autoclaved without loss of integrity.

Supplier: Restek

The ECD vent trap reduces the release of hazardous materials from the ECD vent into the lab.

Supplier: Restek

Hydrocarbon traps effectively remove trace impurities from carrier gas.

Supplier: Restek

These 47 mm glass fiber disks are embedded with styrene/DVB resin.

Supplier: New England Biolabs (NEB)

NEBExpress Ni Resin is an affinity matrix for the isolation and purification of polyhistidine-tagged (His-tagged) fusion proteins.

Supplier: Restek

Purged with ultra-high-purity helium; ready to use with any carrier gas including hydrogen.

Supplier: Restek

High-capacity split vent traps reduce the release of hazardous materials from the capillary split vent into the lab.

Supplier: Airgas

OMI-2 indicating purifier irreversibly removes contaminants from carrier gases. It effectively purifies helium, hydrogen, nitrogen, argon/methane, and ammonia.

Supplier: Total Filtration Services

The A-series family of unique thin-film reverse osmosis membrane elements are characterized by high flux and high sodium chloride rejection.

Supplier: Restek

Click-On fittings allow for easy, leak-tight cartridge changes, and traps are made of durable brass or stainless steel.

Supplier: 3M Healthcare

3M™ CUNO legacy large diameter drop–in style replacement cartridge, Model CFS210–2, when used in a drop–in style filtration housing, provides consistent quality water by reducing particulate.

Supplier: SERV-A-PURE COMPANY TE

FILMTEC™ Elements are heat-sanitizable reverse osmosis elements that deliver outstanding quality water with the added capability to withstand sanitization with hot water, eliminating the need for chemical sanitizers.

Supplier: 3M Healthcare

3M™ CUNO legacy large diameter drop–in style replacement cartridge, Model CFS215–2, when used in a drop–in style filtration housing, provides consistent quality water by reducing particulate and chlorine taste and odor.

Supplier: 3M Healthcare

3M™ Drop–in style single prefilter housing featuring pressure relief valve and transparent sump, Model CFS11T is designed for use with 9¾" cartridges and features a non–valved head design.

Supplier: 3M Healthcare

3M™ Water Filtration Products High Flow Series Model HF30 Replacement Cartridge for cold beverage applications and provide you with Recipe Quality Water™ for a consistent quality carbonated and non–carbonated beverage that can help increase repeat business and elevate profitability.

Supplier: Foxx Life Sciences

Ezwaste™ Solvent Waste System with the Safety Vent VersaCap® 83 mm is designed to be an affordable solution for HPLC liquid waste disposal.

Supplier: 3M Healthcare

3M™ High Flow Series Replacement Cartridge, Model 160–L provides consistent quality high water by reducing particulate*, chlorine taste and odor, lead, benzene, toxaphene, p–Dichlorobenzene, cyst**, and bacteria. The Sanitary Quick Change (SQC) design allows for fast and easy cartridge change–outs.