You searched for: Tube Racks

Supplier: Dynalon

Blood bank cross match holders are manufactured of clear acrylic shelves with white bases and sides

Supplier: United Product & Instrument

The Basis For Sample Management In Any Type Of Laboratory.

Supplier: Thermo Fisher Scientific

The unique end plate on this rack allows you to create agar slant tubes at either 5° or 20° depending on which side you use. To create the slant tubes, simply autoclave the media tubes while they are in the rack, and after autoclaving, set the rack on the bench at the desired angle. The media will harden with a consistent slant. The rack is also useful for incubating liquid cultures on a slant. In addition, it is keyed with numbers and letters for identification, is stackable, and does not float in water baths. It will hold forty 16 mm tubes. Size: 11 1/4" x 4 1/2".

Supplier: Simport Scientific

Multipurpose storage box and workstation in a 96-well format.

Supplier: Ward's Science

This corrosion-proof polypropylene basket is ideal for rinsing glassware — simply slide the lid on, rinse, and invert for easy draining. The basket holds test tubes for storage, sterilization, or incubation. Autoclavable to 121°C. Size: 17 x 17 x 16cm.

Supplier: Heathrow Scientific

These Low Temperature PCR Racks feature a sliding lid that roates 180° to become a convenient stand that the rack sits on. These PCR racks also feature ergonomic textured finger grips that provide a secure hold, reducing the chance of dropping the rack, and makes handling and transportation easy.

Supplier: Thermo Fisher Scientific

This reversible rack is ideal for any researcher utilizing strip tubes for PCR.

Supplier: Globe Scientific

Reinforced nylon rack is autoclavable and chemical resistant.

Supplier: Electron Microscopy Sciences

Polypropylene rack has 96 wells to accommodate 0.5 mL micro centrifuge tubes on one side, or 96 wells for 1.5 to 2.0 mL micro centrifuge tubes on the other side. Arranged in standard 8 x 12 array. Handy lid snaps into place in the tabs on each end of rack. Grid lines are molded on the side of the rack that accommodates the smaller tubes making it easier to see the wells. Raised rings are molded on the opposite side of the rack making it easier to replace the 1.5 to 2.0 mL tubes from those wells. Rack measures 9.75 x 4.75 x 1.875".

Supplier: Eppendorf

Supplier: Eppendorf

These transfer racks are designed as a work rack for sample preparation and used to maintain accurate and uniform temperatures.

Supplier: GeneMate

IsoFreeze MCT racks are manufactured with a gel-filled center section that uses temperature-dependent color-change material, green to yellow or purple to pink.

Supplier: GeneMate

This compact rack is small enough to pick up with one hand, but big enough to hold enough tubes for most experiments. One side of the rack has 32 wells for 0.5 mL tubes plus an additional 8 wells across for 1.5/2.0 mL tubes. The reverse/flip side has the opposite configuration of 32 wells for 1.5/2.0 mL tubes and 8 wells for 0.5 mL tubes.

Supplier: Brandtech

Centrifuge tube mini-coolers accommodate twelve microtubes ranging from 0.5 to 2.0 ml.

Supplier: SARSTEDT INC

SARSTEDT PCR consumables are compatible with standard thermocyclers.

Supplier: Wards

Safely store up to 12 burets.

Supplier: Shiv Dial Sud & Sons

With drilled holes to accommodate seven tubes up to 13 mm in dia. Strongly constructed with dovetail joints. Size: 2-3/8" H x 7-7/8 W x 1-3/8" D.

Supplier: SARSTEDT INC

High-quality, safe, and robust racks and boxes are essential for specimen processing and storage. SARSTEDT offers the right product for every laboratory and analytical requirement.

Supplier: SARSTEDT INC

SARSTEDT PCR consumables are compatible with standard thermocyclers.

Supplier: Bel-Art

Scienceware® Lab-Aire II Non-Electric Wallmount Dryers keep labware up off the bench and out of the way as it dries.

Supplier: Caplugs

Single-jar stand provides convenient support for patient collection.

Supplier: Heathrow Scientific

Microtube rack is made of reinforced nylon, and offers superior chemical and heat resistance over most other plastic based racks.

Supplier: GeneMate

The rack is formatted in the standard 8 x 12 microtiter format and indexed A through H vertically and 1 through 12 horizontally for convenient and error-free tube identification. The included natural lids have a non-slip edge to allow non-slip stacking of multiple racks.

Supplier: GeneMate

Holds:

Supplier: CRYSTAL TECHNOLOGY & INDUSTRIES

Tube Holder and Carousels for Crystal Tube Rotators, Crystal

Supplier: Electron Microscopy Sciences

Rust-proof anodized aluminum rack – designed to be used in water/ice baths.

Supplier: Heathrow Scientific

These racks helps to keep large numbers of microtubes organized on benchtop.

Supplier: United Scientific Supplies

Easy to grab polypropylene floating rack.

Supplier: Shiv Dial Sud & Sons

Made of wood with turned wood posts. Has holes for tubes up to 19 mm in diameter.

Supplier: Janitorial Supplies

Tools are inserted from the bottom and held in place by strong rubber grips.