You searched for: Chromatography Supplies

Supplier: PerkinElmer

The platinum injector shield disc for ELAN Bayonet protects PFA injector base from damage caused by heat and light from the instrument, extends injector lifetime, and improves long-term instrument stability.

Supplier: PerkinElmer

This Alumina Injector is used with Optima™ 3x00 XL/3x00 DV/3000 SCX/4300V/5300V/7300V ICP-OES series instruments.

Supplier: PerkinElmer

This Quartz Injector Cassette Mount is designed for use with demountable torches in PerkinElmer NexION® 300/350 ICP-MS series instruments.

Supplier: PerkinElmer

This quartz torch is designed for use with Optima™ 3000 SCX and 3x00 XL ICP-OES series instruments.

Supplier: PerkinElmer

The PFA sample loop is used with the AXPRESS® PLUS valve/pump module for oils applications.

Supplier: PerkinElmer

This Quartz Injector Cassette Mount is designed for use with demountable torches in NexION® 300/350 ICP-MS series instruments.

Supplier: PerkinElmer

Instrument performance validation kits are available for both Mid-IR and Near-IR FT-IR instruments

Supplier: PerkinElmer

This UniFit Connector is designed for use with concentric glass nebulizers in Optima® 4x00/5x00/7x00/8x00 and Avio® 200/500 ICP-OES series instruments in addition to ELAN® 5000/6x00/9000/DRCs and NexION® 300/350/1000/2000 ICP-MS series instruments. The UniFit connector is a convenient drain connector for glass cyclonic spray chambers and is 700 mm long.

Supplier: PerkinElmer

High volume, fast-loading PFA FAST loops for high-flow valves.

Supplier: PerkinElmer

Beryl Copper pen clips for use with stainless steel ATD tubes.

Supplier: PerkinElmer

Supplier: PerkinElmer

Supplier: PerkinElmer

This 1-slot quartz torch is designed for use with Optima™ 3x00 DV ICP-OES series instruments.

Supplier: PerkinElmer

This spares kit is designed for GemTip cross-flow nebulizers in Optima® 2x00/4x00/5x00/7x00 DV ICP-OES series instruments. It includes general replacement parts for the nebulizer.

Supplier: PerkinElmer

Carbon fiber sample probe, with Int.Ø of 1.0 mm, for the ASXPRESS® PLUS.

Supplier: PerkinElmer

This quick-change sample introduction module, with cyclonic spray chamber and MEINHARD® concentric nebulizer technologies, includes core consumables and components for Optima™ 2x00 DV, 4x00 DV, 5x00 DV, and 7x00 DV ICP-OES series instruments.

Supplier: PerkinElmer

Supplier: PerkinElmer

This quartz radial window for the purge extension is used with Optima™ 3000, 3000 SCR, 3x00 RL, 4300 V, 5300 V, and 7300 V ICP-OES series instruments.

Supplier: PerkinElmer

To be used in conjunction with outer liner (N1011447).

Supplier: PerkinElmer

This quartz bonnet is used with Optima™ 3×00 XL and 3×00 DV ICP-OES series instruments.

Supplier: PerkinElmer

Adapter allows non-coded Intensitron lamps (03036XXX series, 9-pin) and other 9-pin lamps to be used with PinAAcle and AAnalyst instruments (4-pin).

Supplier: PerkinElmer

The FEP sample loop, with a 2.0 mm inner diameter, is used with the AXPRESS® PLUS value/pump module for aqueous applications.

Supplier: PerkinElmer

This UniFit Connector is designed for use with concentric glass nebulizers in Optima™ 4x00/5x00/7x00/8x00 and Avio® 200/500 ICP-OES series instruments in addition to ELAN® 5000/6x00/9000/DRCs and NexION® 300/350/1000/2000 ICP-MS series instruments.

Supplier: PerkinElmer

Sample loops are often used to absorb sample components resulting in inaccurate quantitative results. In addition, metal loops may be corroded by high-salt buffers and chloride salts. Sample Loops are made from PEEK tubing and fittings.

Supplier: PerkinElmer

PFA sample loops, with a 1.0mm inner diameter, are used with the AXPRESS® PLUS valve/pump module for oils applications.

Supplier: PerkinElmer

This ceramic impact bead is for use with AAnalyst® 100/300/200/400/700/800 and earlier AA series instruments. It is designed for use in High Sensitivity Plastic Body Nebulizers.

Supplier: PerkinElmer

This glass water-cooled baffled cyclonic spray chamber, with gas port and ball joint connection, is used with ELAN® DRC, DRCplus, and DRC II ICP-MS series instruments.

Supplier: PerkinElmer

This torch adapter, with an auxiliary port for oxygen addition, is used with PerkinElmer Optima™ 4300 V, 5300 V, and 7300 V ICP-OES series instruments.

Supplier: PerkinElmer

Allows coded lamps (N06612XX series, 12-pin) to be used with AAnalyst instruments (4-pin); however, an AAnalyst spectrometer does not recognize their coding.

Supplier: PerkinElmer

For reflectance or thickness measurements. Use with LAMBDA 25/35/45/650/750/850/950/1050.