You searched for: Electrodes

Supplier: ONSET COMPUTER CORPORATION SE

Versatile, high-performance air velocity and air temperature sensors, with sensor element built remotely from sensor electronics; F350 series.

Supplier: Vernier Software & Technology

Measure the ability of a solution to act as an oxidizing agent or reducing agent with this oxidation-reduction potential sensor.

Supplier: Vernier Software & Technology

This completely wireless system simplifies experiment setup and allows basic experiments to be conducted with or without the track.

Supplier: Vernier Software & Technology

Use the Go Direct Glass-body pH to measure pH in aqueous, heterogeneous, and organic solutions.

Supplier: CAL TEST ELECTRONICS SE

A high bandwidth, high voltage 100x passive voltage probe with a 100 MΩ input impedance.

Supplier: Vernier Software & Technology

Easily quantify voltage, current, power, and energy output of small wind turbines and solar panels.

Supplier: Sper Scientific

Replacement probe for model 850059 pH Meter Datalogging Kit.

Supplier: Hach

These digital combination electrodes feature a built-in temperature sensor and are either refillable or non refillable. They can be used with all Hach HQd™ meters.

Supplier: TESTEQUITY LLC TE

Precision Electronic Test Probe Set.

Supplier: Wards

Introduce and explore electricity concepts and safely measure electrical voltage with the Ward's Single Probes Voltage Sensor.

Supplier: Wards

Introduce and explore electricity concepts and safely measure electrical current with the Ward's Single Probes Current Sensor.

Supplier: Vernier Software & Technology

Secure your Go Direct® sensors for field work.

Supplier: WORLD PRECISION INSTRUMENTS LLC

Carbon monoxide (CO) is a versatile mediator of physiological processes. Carbon monoxide (CO) formed by internal mechanisms (endogenous) is measured in a variety of ways, but standard measurement methods are of limited utility in most biological systems. CO sensor measures CO in vivo or in vitro in real time.

Supplier: Hach

These glass electrodes are compatible with Hach sensION+ benchtop pH meters (or any meter with a BNC connection). The PHG301 pH electrode should be used with Ag/AgCl or calomel reference electrodes.

Supplier: TESTEQUITY LLC TE

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter.

Supplier: WORLD PRECISION INSTRUMENTS LLC

ISO NOPF electrodes are  flexible sensor, nearly unbreakable and available in 100, 200 and 500 µm diameters. Laboratory have created these completely flexible and virtually unbreakable NO sensors.

Supplier: Hach

IntelliCAL™ ISENO3181 is a digital combination nitrate ion selective electrode (ISE) with a non refillable, double junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.

Supplier: Siemens Healthineers

Inner Element Assembly from Siemens Healthineers are for use with RAPIDLab® 1200 Blood Gas Analyzers.

Supplier: Hach

sensION+ 5057 is a combination platinum ORP electrode with a glass body and refillable liquid-electrolyte reference. It is dedicated for use with Hach sensION+ labpratory pH (mV) meters.

Supplier: WTW

Adapter cable required.

Supplier: Mettler Toledo

Flow cells are recommended for measuring conductivity in pure water or in samples with low conductivity to rule out the falsification of results by carbon dioxide.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The hydrogen peroxide sensors developed by WPI are designed to compliment existing high sensitivity fluorescent approaches with direct quantitative measurement in biological samples in the low nM range.

Supplier: YSI

Connect any ProDIGITAL integrated probe/cable assembly the ProSolo to form a complete sampling system. Probe assemblies are user-replaceable with cable lengths ranging from 1 to 100 m.

Supplier: Hach

The 5044 with lithium acetate electrolyte is recommended for use with all sensION+ half-cell ion selective electrodes (ISE) in drinking water, wastewater and general water quality applications.

Supplier: Hach

sensION+ 9650 is a half-cell sodium ion selective electrode (ISE) with glass body and glass membrane selective to sodium ions in solution. It is recommended for use with the sensION+ 5044 reference electrode.

Supplier: Hach

This digital, combination gas-sensing ammonia ion selective electrode (ISE) with replaceable membrane module, refillable outer body, double junction reference and built-in temperature sensor is intended for laboratory use.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The ISO NOPNM is based on a novel design in which an electrochemically activated composite graphite nanofiber is used as the NO sensing element. The surface of the Nanosensor is then modified using a unique multi-layered NO selective membrane.

Supplier: WTW

These galvanic sensors are ready-to-use and are equipped with protective hoods for rough conditions.

Supplier: WORLD PRECISION INSTRUMENTS LLC

Low detection limit sensors to record in vitro. Hydrogen sulfide is generally thought of in terms of a poisonous gas, it is endogenously produced in many mammalian tissues. It has been detected in micromolar amounts in blood and brain tissue.

Supplier: Siemens Healthineers

Reagent Cartridges from Siemens Healthineers contain calibtrators for use with RAPIDLab® 1200 series Blood Gas Analyzers.